- Home/
- Comparison/
- Rough Terrain Truck/
- Gehl CTL75 vs. Gehl CTL80
Gehl CTL75 vs. Gehl CTL80
10 reasons to buy Gehl CTL75:
Sizes
Machine rear swing radius from center | 1666 mm and 1816 mm | 8 % less or 150 mm |
Turning radius with bucket from center | 2294 mm and 2692 mm | 15 % less or 398 mm |
Ground clearance at maximum lifting and unloading | 2405 mm and 2375 mm | 1 % more or 30 mm |
Operation
Maximum speed at high range | 11.6 km/h and 11 km/h | 5 % more or 0.6 km/h |
Cooling system fluid volume | 16.5 l. and 15.1 l. | 8 % more or 1.4 l. |
Motor
Power measured at | 2500 rev / min and 2200 rev / min | 12 % more or 300 rev |
Peak torque | 296.9 Nm and 259 Nm | 13 % more or 37.9 Nm |
Torque measured at | 1800 rev / min and 1400 rev / min | 22 % more or 400 rev |
Load-transfer device
Tipping load | 2700 kg and 3200.5 kg | 16 % less or 500.5 kg |
Hydraulic system
Pump flow rate | 74.9 l/min and 88.6 l/min | 15 % less or 13.7 l/min |
9 reasons to buy Gehl CTL80:
Sizes
Radius at maximum lifting and unloading | 1049 mm and 874 mm | 17 % more or 175 mm |
Clearance | 363 mm and 325 mm | 10 % more or 38 mm |
Operation
Fuel Capacity | 107.9 l. and 90.1 l. | 16 % more or 17.8 l. |
Engine oil volume | 14 l. and 10.2 l. | 27 % more or 3.8 l. |
Hydraulic system fluid volume | 64 l. and 48.5 l. | 24 % more or 15.5 l. |
Generator current strength | 50 amperes and 40 amperes | 20 % more or 10 amperes |
Maximum speed at low range | 8 km/h and 7.6 km/h | 5 % more or 0.4 km/h |
Motor
Displacement | 4.4 l. and 3.3 l. | 25 % more or 1.1 l. |
Carrier
Rolling bearings number on either side | 5 and 4 | 20 % more or 1 |
Neutral reasons:
Sizes
Width between caterpillar tracks | 1770 mm and 1884 mm |
Length with bucket | 3740 mm and 4026 mm |
Length without bucket | 2980 mm and 3106 mm |
Height to cab upper part | 2167 mm and 2217 mm |
Operation
Operating voltage | 12 V and 12 V |
Working weight | 4400 kg and 4849.8 kg |
Motor
Model | 4TNV98T and 4TNV106T |
Manufacturer | Yanmar and Yanmar |
Cylinders number | 4 and 4 |
Aspiration | turbocharging and turbocharging |
Load-transfer device
Workload | 1350 kg and 1600.3 kg |
Hydraulic system
Overflow valve pressure | 20601.5 kPa and 20601.5 kPa |
Carrier
Specific ground pressure | 29.6 kPa and 29.6 kPa |
Caterpillar track length on ground level | 1496 mm and 1598 mm |
Caterpillar track width | 457 mm and 457 mm |
Images
Sizes
3. Height to cab upper part | 2167 mm | 3. Height to cab upper part | 2217 mm |
5. Clearance | 325 mm | 5. Clearance | 363 mm |
6. Length without bucket | 2980 mm | 6. Length without bucket | 3106 mm |
7. Ground clearance at maximum lifting and unloading | 2405 mm | 7. Ground clearance at maximum lifting and unloading | 2375 mm |
8. Radius at maximum lifting and unloading | 874 mm | 8. Radius at maximum lifting and unloading | 1049 mm |
1. Length with bucket | 3740 mm | 1. Length with bucket | 4026 mm |
2. Width between caterpillar tracks | 1770 mm | 2. Width between caterpillar tracks | 1884 mm |
Carrier
4. Caterpillar track length on ground level | 1496 mm | 4. Caterpillar track length on ground level | 1598 mm |