John Deere CT332 vs. Terex PT30

8 reasons to buy John Deere CT332:

Clearance	279 mm and 254 mm	9 % more or 25 mm
Ground clearance at maximum lifting and unloading	2591 mm and 1962 mm	24 % more or 629 mm

Fuel Capacity	106 l. and 37.9 l.	64 % more or 68.1 l.
Generator current strength	70 amperes and 65 amperes	7 % more or 5 amperes

Caterpillar track width

450 mm and 279.4 mm

38 % more or 170.6 mm

Maximum speed at low range

9.7 km/h and 8.5 km/h

12 % more or 1.2 km/h

Tipping load

861.8 kg and 4173 kg

79 % less or 3311.2 kg

Pump flow rate

37.9 l/min and 90.8 l/min

58 % less or 52.9 l/min

Specific ground pressure	20.7 kPa and 29.6 kPa	30 % less or 8.9 kPa
Rolling bearings number on either side	12 and 5	58 % more or 7

Length with bucket	3518 mm and 2896 mm
Width between caterpillar tracks	2047 mm and 1219 mm
Length without bucket	2934 mm and 2298.2 mm
Height to cab upper part	2106 mm and 1840 mm

Working weight	4910 kg and 1632.9 kg
Operating voltage	12 V and 12 V

Manufacturer	John Deere and Perkins
Model	5030Tw and 403D-15
Power measured at	2800 rev / min and 2800 rev / min
Aspiration	turbocharging and natural aspiration

Workload

1452 kg and 430.9 kg

Overflow valve pressure

21373.7 kPa and 20684.3 kPa

1. Length with bucket	3518 mm	1. Length with bucket	2896 mm
2. Width between caterpillar tracks	2047 mm	2. Width between caterpillar tracks	1219 mm
3. Height to cab upper part	2106 mm	3. Height to cab upper part	1840 mm
5. Clearance	279 mm	5. Clearance	254 mm
6. Length without bucket	2934 mm	6. Length without bucket	2298.2 mm
7. Ground clearance at maximum lifting and unloading	2591 mm	7. Ground clearance at maximum lifting and unloading	1962 mm