vs.

      Mustang MTL16 vs. Gehl CTL70

      7 reasons to buy Mustang MTL16:

      Sizes

      Machine rear swing radius from center 1549 mm and 1666 mm 7 % less or 117 mm

      Operation

      Engine oil volume 10.2 l. and 9.4 l. 8 % more or 0.8 l.
      Hydraulic system fluid volume 59.8 l. and 51.8 l. 13 % more or 8.0 l.

      Motor

      Displacement 3.3 l. and 3.1 l. 6 % more or 0.2 l.

      Load-transfer device

      Tipping load 2100 kg and 2699.8 kg 22 % less or 599.8 kg
      Breakout power 3051 kg and 3357 kg 9 % less or 306 kg

      Hydraulic system

      Pump flow rate 68 l/min and 75 l/min 9 % less or 7 l/min

      12 reasons to buy Gehl CTL70:

      Sizes

      Turning radius with bucket from center 2294 mm and 2362 mm 3 % less or 68 mm
      Clearance 325 mm and 310 mm 5 % more or 15 mm
      Ground clearance at maximum lifting and unloading 2408 mm and 2370 mm 2 % more or 38 mm
      Radius at maximum lifting and unloading 874 mm and 851 mm 3 % more or 23 mm

      Operation

      Maximum speed at high range 10.3 km/h and 10.1 km/h 2 % more or 0.2 km/h
      Fuel Capacity 90.1 l. and 75 l. 17 % more or 15.1 l.
      Cooling system fluid volume 15.1 l. and 11 l. 27 % more or 4.1 l.
      Generator current strength 50 amperes and 40 amperes 20 % more or 10 amperes

      Motor

      Peak torque 257.6 Nm and 244 Nm 5 % more or 13.6 Nm
      Torque measured at 1800 rev / min and 1600 rev / min 11 % more or 200 rev

      Carrier

      Caterpillar track width 457 mm and 320 mm 30 % more or 137 mm
      Specific ground pressure 28.3 kPa and 33.5 kPa 16 % less or 5.2 kPa

      Neutral reasons:

      Sizes

      Length without bucket 2756 mm and 2949 mm
      Height to cab upper part 2123 mm and 2167 mm
      Width between caterpillar tracks 1580 mm and 1770 mm
      Length with bucket 3543 mm and 3708 mm

      Operation

      Maximum speed at low range 7.2 km/h and 7.2 km/h
      Working weight 3401 kg and 4350 kg
      Operating voltage 12 V and 12 V

      Motor

      Power measured at 2400 rev / min and 2400 rev / min
      Manufacturer Yanmar and Isuzu
      Model 4TNV98 and 4JG1T
      Cylinders number 4 and 4
      Aspiration natural aspiration and turbocharging

      Load-transfer device

      Workload 1050 kg and 1349.9 kg

      Hydraulic system

      Overflow valve pressure 20600 kPa and 20601.5 kPa

      Carrier

      Rolling bearings number on either side 4 and 4
      Caterpillar track length on ground level 1389 mm and 1496 mm

      Images

      Sizes

      8. Radius at maximum lifting and unloading 851 mm 8. Radius at maximum lifting and unloading 874 mm
      1. Length with bucket 3543 mm 1. Length with bucket 3708 mm
      2. Width between caterpillar tracks 1580 mm 2. Width between caterpillar tracks 1770 mm
      3. Height to cab upper part 2123 mm 3. Height to cab upper part 2167 mm
      5. Clearance 310 mm 5. Clearance 325 mm
      6. Length without bucket 2756 mm 6. Length without bucket 2949 mm
      7. Ground clearance at maximum lifting and unloading 2370 mm 7. Ground clearance at maximum lifting and unloading 2408 mm

      Carrier

      4. Caterpillar track length on ground level 1389 mm 4. Caterpillar track length on ground level 1496 mm