vs.

      Mustang MTL16 vs. Gehl CTL80

      7 reasons to buy Mustang MTL16:

      Sizes

      Machine rear swing radius from center 1549 mm and 1816 mm 15 % less or 267 mm
      Turning radius with bucket from center 2362 mm and 2692 mm 12 % less or 330 mm

      Motor

      Torque measured at 1600 rev / min and 1400 rev / min 12 % more or 200 rev
      Power measured at 2400 rev / min and 2200 rev / min 8 % more or 200 rev

      Load-transfer device

      Breakout power 3051 kg and 3942.6 kg 23 % less or 891.6 kg
      Tipping load 2100 kg and 3200.5 kg 34 % less or 1100.5 kg

      Hydraulic system

      Pump flow rate 68 l/min and 88.6 l/min 23 % less or 20.6 l/min

      15 reasons to buy Gehl CTL80:

      Sizes

      Clearance 363 mm and 310 mm 15 % more or 53 mm
      Ground clearance at maximum lifting and unloading 2375 mm and 2370 mm 0 % more or 5 mm
      Radius at maximum lifting and unloading 1049 mm and 851 mm 19 % more or 198 mm

      Operation

      Fuel Capacity 107.9 l. and 75 l. 30 % more or 32.9 l.
      Cooling system fluid volume 15.1 l. and 11 l. 27 % more or 4.1 l.
      Engine oil volume 14 l. and 10.2 l. 27 % more or 3.8 l.
      Hydraulic system fluid volume 64 l. and 59.8 l. 7 % more or 4.2 l.
      Generator current strength 50 amperes and 40 amperes 20 % more or 10 amperes
      Maximum speed at low range 8 km/h and 7.2 km/h 10 % more or 0.8 km/h
      Maximum speed at high range 11 km/h and 10.1 km/h 8 % more or 0.9 km/h

      Motor

      Peak torque 259 Nm and 244 Nm 6 % more or 15 Nm
      Displacement 4.4 l. and 3.3 l. 25 % more or 1.1 l.

      Carrier

      Specific ground pressure 29.6 kPa and 33.5 kPa 12 % less or 3.9 kPa
      Rolling bearings number on either side 5 and 4 20 % more or 1
      Caterpillar track width 457 mm and 320 mm 30 % more or 137 mm

      Neutral reasons:

      Sizes

      Width between caterpillar tracks 1580 mm and 1884 mm
      Length with bucket 3543 mm and 4026 mm
      Length without bucket 2756 mm and 3106 mm
      Height to cab upper part 2123 mm and 2217 mm

      Operation

      Working weight 3401 kg and 4849.8 kg
      Operating voltage 12 V and 12 V

      Motor

      Manufacturer Yanmar and Yanmar
      Model 4TNV98 and 4TNV106T
      Cylinders number 4 and 4
      Aspiration natural aspiration and turbocharging

      Load-transfer device

      Workload 1050 kg and 1600.3 kg

      Hydraulic system

      Overflow valve pressure 20600 kPa and 20601.5 kPa

      Carrier

      Caterpillar track length on ground level 1389 mm and 1598 mm

      Images

      Sizes

      1. Length with bucket 3543 mm 1. Length with bucket 4026 mm
      2. Width between caterpillar tracks 1580 mm 2. Width between caterpillar tracks 1884 mm
      3. Height to cab upper part 2123 mm 3. Height to cab upper part 2217 mm
      5. Clearance 310 mm 5. Clearance 363 mm
      6. Length without bucket 2756 mm 6. Length without bucket 3106 mm
      7. Ground clearance at maximum lifting and unloading 2370 mm 7. Ground clearance at maximum lifting and unloading 2375 mm
      8. Radius at maximum lifting and unloading 851 mm 8. Radius at maximum lifting and unloading 1049 mm

      Carrier

      4. Caterpillar track length on ground level 1389 mm 4. Caterpillar track length on ground level 1598 mm