- Home/
- Comparison/
- Rough Terrain Truck/
- Mustang MTL20 vs. Case 420CT
Mustang MTL20 vs. Case 420CT
13 reasons to buy Mustang MTL20:
Sizes
Clearance | 325 mm and 203 mm | 38 % more or 122 mm |
Ground clearance at maximum lifting and unloading | 2408 mm and 2270 mm | 6 % more or 138 mm |
Radius at maximum lifting and unloading | 874 mm and 630 mm | 28 % more or 244 mm |
Operation
Hydraulic system fluid volume | 83 l. and 50 l. | 40 % more or 33 l. |
Maximum speed at high range | 10.3 km/h and 10.1 km/h | 2 % more or 0.2 km/h |
Fuel Capacity | 90 l. and 83.3 l. | 7 % more or 6.7 l. |
Motor
Full power | 60 kW and 44 kW | 27 % more or 16 kW |
Peak torque | 258 Nm and 179 Nm | 31 % more or 79 Nm |
Torque measured at | 1800 rev / min and 1700 rev / min | 6 % more or 100 rev |
Displacement | 3.1 l. and 2.2 l. | 29 % more or 0.9 l. |
Carrier
Specific ground pressure | 28.3 kPa and 35.8 kPa | 21 % less or 7.5 kPa |
Rolling bearings number on either side | 4 and 3 | 25 % more or 1 |
Caterpillar track width | 457 mm and 320 mm | 30 % more or 137 mm |
9 reasons to buy Case 420CT:
Sizes
Machine rear swing radius from center | 1420 mm and 1666 mm | 15 % less or 246 mm |
Turning radius with bucket from center | 1970 mm and 2294 mm | 14 % less or 324 mm |
Operation
Generator current strength | 55 amperes and 50 amperes | 9 % more or 5 amperes |
Cooling system fluid volume | 17 l. and 15.1 l. | 11 % more or 1.9 l. |
Engine oil volume | 10.5 l. and 9.4 l. | 10 % more or 1.1 l. |
Motor
Power measured at | 2900 rev / min and 2400 rev / min | 17 % more or 500 rev |
Load-transfer device
Tipping load | 2268 kg and 2700 kg | 16 % less or 432 kg |
Breakout power | 2070 kg and 3357 kg | 38 % less or 1287 kg |
Hydraulic system
Pump flow rate | 73.8 l/min and 75 l/min | 2 % less or 1.2 l/min |
Neutral reasons:
Sizes
Length without bucket | 2949 mm and 2540 mm |
Width between caterpillar tracks | 1770 mm and 1651 mm |
Height to cab upper part | 2167 mm and 1920 mm |
Length with bucket | 3708 mm and 3130 mm |
Operation
Working weight | 4350 kg and 3334 kg |
Motor
Manufacturer | Isuzu and Case |
Model | 4JG1T and 422T/M2 |
Cylinders number | 4 and 4 |
Aspiration | turbocharging and turbocharging |
Load-transfer device
Workload | 1350 kg and 1134 kg |
Hydraulic system
Overflow valve pressure | 20600 kPa and 20684.3 kPa |
Carrier
Caterpillar track length on ground level | 1499 mm and 1436 mm |
Track width | 1313 mm and 1300 mm |
Images
Sizes
1. Length with bucket | 3708 mm | 1. Length with bucket | 3130 mm |
2. Width between caterpillar tracks | 1770 mm | 2. Width between caterpillar tracks | 1651 mm |
3. Height to cab upper part | 2167 mm | 3. Height to cab upper part | 1920 mm |
5. Clearance | 325 mm | 5. Clearance | 203 mm |
6. Length without bucket | 2949 mm | 6. Length without bucket | 2540 mm |
7. Ground clearance at maximum lifting and unloading | 2408 mm | 7. Ground clearance at maximum lifting and unloading | 2270 mm |
8. Radius at maximum lifting and unloading | 874 mm | 8. Radius at maximum lifting and unloading | 630 mm |
Carrier
4. Caterpillar track length on ground level | 1499 mm | 4. Caterpillar track length on ground level | 1436 mm |
9. Track width | 1313 mm | 9. Track width | 1300 mm |