- Home/
- Comparison/
- Rough Terrain Truck/
- Mustang MTL20 vs. Case 445CT serie 3
Mustang MTL20 vs. Case 445CT serie 3
12 reasons to buy Mustang MTL20:
Sizes
Turning radius with bucket from center | 2294 mm and 2340 mm | 2 % less or 46 mm |
Clearance | 325 mm and 283 mm | 13 % more or 42 mm |
Ground clearance at maximum lifting and unloading | 2408 mm and 2230 mm | 7 % more or 178 mm |
Operation
Fuel Capacity | 90 l. and 65.5 l. | 27 % more or 24.5 l. |
Cooling system fluid volume | 15.1 l. and 11.4 l. | 25 % more or 3.7 l. |
Engine oil volume | 9.4 l. and 8.5 l. | 10 % more or 0.9 l. |
Hydraulic system fluid volume | 83 l. and 41.6 l. | 50 % more or 41.4 l. |
Motor
Torque measured at | 1800 rev / min and 1400 rev / min | 22 % more or 400 rev |
Load-transfer device
Tipping load | 2700 kg and 2993.7 kg | 10 % less or 293.7 kg |
Hydraulic system
Pump flow rate | 75 l/min and 90.1 l/min | 17 % less or 15.1 l/min |
Carrier
Caterpillar track width | 457 mm and 450 mm | 2 % more or 7 mm |
Specific ground pressure | 28.3 kPa and 29.6 kPa | 4 % less or 1.3 kPa |
9 reasons to buy Case 445CT serie 3:
Sizes
Radius at maximum lifting and unloading | 1030 mm and 874 mm | 15 % more or 156 mm |
Machine rear swing radius from center | 1400 mm and 1666 mm | 16 % less or 266 mm |
Operation
Generator current strength | 95 amperes and 50 amperes | 47 % more or 45 amperes |
Maximum speed at low range | 8.2 km/h and 7.2 km/h | 12 % more or 1.0 km/h |
Maximum speed at high range | 12.9 km/h and 10.3 km/h | 20 % more or 2.6 km/h |
Motor
Peak torque | 310.5 Nm and 258 Nm | 17 % more or 52.5 Nm |
Full power | 61.1 kW and 60 kW | 2 % more or 1.1 kW |
Displacement | 3.2 l. and 3.1 l. | 3 % more or 0.1 l. |
Power measured at | 2500 rev / min and 2400 rev / min | 4 % more or 100 rev |
Neutral reasons:
Sizes
Width between caterpillar tracks | 1770 mm and 2112 mm |
Length with bucket | 3708 mm and 3440 mm |
Length without bucket | 2949 mm and 2650 mm |
Height to cab upper part | 2167 mm and 2110 mm |
Operation
Operating voltage | 12 V and 12 V |
Working weight | 4350 kg and 4626.6 kg |
Motor
Manufacturer | Isuzu and Case |
Model | 4JG1T and 432T/M3 |
Cylinders number | 4 and 4 |
Aspiration | turbocharging and turbocharging |
Load-transfer device
Workload | 1350 kg and 1496.9 kg |
Carrier
Rolling bearings number on either side | 4 and 4 |
Caterpillar track length on ground level | 1499 mm and 499262.4 mm |
Images
Sizes
3. Height to cab upper part | 2167 mm | 3. Height to cab upper part | 2110 mm |
5. Clearance | 325 mm | 5. Clearance | 283 mm |
6. Length without bucket | 2949 mm | 6. Length without bucket | 2650 mm |
7. Ground clearance at maximum lifting and unloading | 2408 mm | 7. Ground clearance at maximum lifting and unloading | 2230 mm |
8. Radius at maximum lifting and unloading | 874 mm | 8. Radius at maximum lifting and unloading | 1030 mm |
1. Length with bucket | 3708 mm | 1. Length with bucket | 3440 mm |
2. Width between caterpillar tracks | 1770 mm | 2. Width between caterpillar tracks | 2112 mm |
Carrier
4. Caterpillar track length on ground level | 1499 mm | 4. Caterpillar track length on ground level | 499262.4 mm |