vs.

      Mustang MTL20 vs. Takeuchi TL150

      9 reasons to buy Mustang MTL20:

      Sizes

      Machine rear swing radius from center 1666 mm and 1745 mm 5 % less or 79 mm
      Turning radius with bucket from center 2294 mm and 2433.3 mm 6 % less or 139.3 mm

      Operation

      Hydraulic system fluid volume 83 l. and 64 l. 23 % more or 19 l.

      Motor

      Torque measured at 1800 rev / min and 1400 rev / min 22 % more or 400 rev
      Power measured at 2400 rev / min and 2200 rev / min 8 % more or 200 rev

      Load-transfer device

      Tipping load 2700 kg and 3200.5 kg 16 % less or 500.5 kg
      Breakout power 3357 kg and 3942.6 kg 15 % less or 585.6 kg

      Hydraulic system

      Pump flow rate 75 l/min and 88.6 l/min 15 % less or 13.6 l/min

      Carrier

      Specific ground pressure 28.3 kPa and 29.6 kPa 4 % less or 1.3 kPa

      13 reasons to buy Takeuchi TL150:

      Sizes

      Clearance 335.3 mm and 325 mm 3 % more or 10.3 mm
      Ground clearance at maximum lifting and unloading 3202.9 mm and 2408 mm 25 % more or 794.9 mm
      Radius at maximum lifting and unloading 985.5 mm and 874 mm 11 % more or 111.5 mm

      Operation

      Fuel Capacity 107.9 l. and 90 l. 17 % more or 17.9 l.
      Engine oil volume 14 l. and 9.4 l. 33 % more or 4.6 l.
      Generator current strength 60 amperes and 50 amperes 17 % more or 10 amperes
      Maximum speed at low range 7.7 km/h and 7.2 km/h 6 % more or 0.5 km/h
      Maximum speed at high range 11.1 km/h and 10.3 km/h 7 % more or 0.8 km/h

      Motor

      Peak torque 394.5 Nm and 258 Nm 35 % more or 136.5 Nm
      Full power 72.3 kW and 60 kW 17 % more or 12.3 kW
      Displacement 4.4 l. and 3.1 l. 30 % more or 1.3 l.

      Carrier

      Caterpillar track width 457.2 mm and 457 mm 0 % more or 0.2 mm
      Rolling bearings number on either side 6 and 4 33 % more or 2

      Neutral reasons:

      Sizes

      Width between caterpillar tracks 1770 mm and 1859.3 mm
      Length with bucket 3708 mm and 3931.9 mm
      Height to cab upper part 2167 mm and 2319 mm

      Operation

      Working weight 4350 kg and 4945.1 kg
      Cooling system fluid volume 15.1 l. and 15.1 l.
      Operating voltage 12 V and 12 V

      Motor

      Model 4JG1T and 4TNV106T
      Cylinders number 4 and 4
      Manufacturer Isuzu and Yanmar

      Load-transfer device

      Workload 1350 kg and 1120.4 kg

      Hydraulic system

      Overflow valve pressure 20600 kPa and 20587.7 kPa

      Carrier

      Caterpillar track length on ground level 1499 mm and 1597.7 mm

      Images

      Sizes

      3. Height to cab upper part 2167 mm 3. Height to cab upper part 2319 mm
      5. Clearance 325 mm 5. Clearance 335.3 mm
      7. Ground clearance at maximum lifting and unloading 2408 mm 7. Ground clearance at maximum lifting and unloading 3202.9 mm
      8. Radius at maximum lifting and unloading 874 mm 8. Radius at maximum lifting and unloading 985.5 mm
      1. Length with bucket 3708 mm 1. Length with bucket 3931.9 mm
      2. Width between caterpillar tracks 1770 mm 2. Width between caterpillar tracks 1859.3 mm

      Carrier

      4. Caterpillar track length on ground level 1499 mm 4. Caterpillar track length on ground level 1597.7 mm