vs.

      Mustang MTL20 vs. Takeuchi TL240

      7 reasons to buy Mustang MTL20:

      Sizes

      Machine rear swing radius from center 1666 mm and 1670 mm 0 % less or 4 mm
      Turning radius with bucket from center 2294 mm and 2362 mm 3 % less or 68 mm

      Operation

      Hydraulic system fluid volume 83 l. and 75 l. 10 % more or 8 l.
      Generator current strength 50 amperes and 40 amperes 20 % more or 10 amperes

      Hydraulic system

      Pump flow rate 75 l/min and 76 l/min 1 % less or 1 l/min

      Carrier

      Specific ground pressure 28.3 kPa and 30.3 kPa 7 % less or 2.0 kPa
      Caterpillar track width 457 mm and 450 mm 2 % more or 7 mm

      12 reasons to buy Takeuchi TL240:

      Sizes

      Radius at maximum lifting and unloading 875 mm and 874 mm 0 % more or 1 mm

      Operation

      Cooling system fluid volume 16.5 l. and 15.1 l. 8 % more or 1.4 l.
      Engine oil volume 10.2 l. and 9.4 l. 8 % more or 0.8 l.
      Maximum speed at low range 7.6 km/h and 7.2 km/h 5 % more or 0.4 km/h
      Maximum speed at high range 11.6 km/h and 10.3 km/h 11 % more or 1.3 km/h

      Motor

      Full power 64.1 kW and 60 kW 6 % more or 4.1 kW
      Power measured at 2500 rev / min and 2400 rev / min 4 % more or 100 rev
      Peak torque 296.9 Nm and 258 Nm 13 % more or 38.9 Nm
      Torque measured at 1850 rev / min and 1800 rev / min 3 % more or 50 rev
      Displacement 3.3 l. and 3.1 l. 6 % more or 0.2 l.

      Load-transfer device

      Tipping load 2699 kg and 2700 kg 0 % less or 1 kg

      Carrier

      Rolling bearings number on either side 5 and 4 20 % more or 1

      Neutral reasons:

      Sizes

      Clearance 325 mm and 325 mm
      Ground clearance at maximum lifting and unloading 2408 mm and 2408 mm
      Width between caterpillar tracks 1770 mm and 1770 mm
      Length with bucket 3708 mm and 3810 mm
      Height to cab upper part 2167 mm and 2270 mm

      Operation

      Working weight 4350 kg and 4701 kg
      Fuel Capacity 90 l. and 90 l.
      Operating voltage 12 V and 12 V

      Motor

      Aspiration turbocharging and turbocharging
      Manufacturer Isuzu and Yanmar
      Cylinders number 4 and 4
      Model 4JG1T and 4TNV98I

      Load-transfer device

      Workload 1350 kg and 944 kg

      Hydraulic system

      Overflow valve pressure 20600 kPa and 20684.3 kPa

      Carrier

      Caterpillar track length on ground level 1499 mm and 1495 mm

      Images

      Sizes

      5. Clearance 325 mm 5. Clearance 325 mm
      7. Ground clearance at maximum lifting and unloading 2408 mm 7. Ground clearance at maximum lifting and unloading 2408 mm
      8. Radius at maximum lifting and unloading 874 mm 8. Radius at maximum lifting and unloading 875 mm
      1. Length with bucket 3708 mm 1. Length with bucket 3810 mm
      2. Width between caterpillar tracks 1770 mm 2. Width between caterpillar tracks 1770 mm
      3. Height to cab upper part 2167 mm 3. Height to cab upper part 2270 mm

      Carrier

      4. Caterpillar track length on ground level 1499 mm 4. Caterpillar track length on ground level 1495 mm