vs.

      New Holland C175 vs. Mustang MTL20

      9 reasons to buy New Holland C175:

      Sizes

      Ground clearance at maximum lifting and unloading 3700 mm and 2408 mm 35 % more or 1292 mm
      Turning radius with bucket from center 1985 mm and 2294 mm 13 % less or 309 mm

      Operation

      Generator current strength 55 amperes and 50 amperes 9 % more or 5 amperes
      Cooling system fluid volume 17 l. and 15.1 l. 11 % more or 1.9 l.
      Maximum speed at low range 9 km/h and 7.2 km/h 20 % more or 1.8 km/h
      Maximum speed at high range 12 km/h and 10.3 km/h 14 % more or 1.7 km/h

      Motor

      Power measured at 2900 rev / min and 2400 rev / min 17 % more or 500 rev

      Load-transfer device

      Breakout power 1956 kg and 3357 kg 42 % less or 1401 kg

      Hydraulic system

      Pump flow rate 65.1 l/min and 75 l/min 13 % less or 9.9 l/min

      12 reasons to buy Mustang MTL20:

      Sizes

      Clearance 325 mm and 200 mm 38 % more or 125 mm
      Radius at maximum lifting and unloading 874 mm and 780 mm 11 % more or 94 mm

      Operation

      Fuel Capacity 90 l. and 54.5 l. 39 % more or 35.5 l.
      Engine oil volume 9.4 l. and 8 l. 15 % more or 1.4 l.
      Hydraulic system fluid volume 83 l. and 32.5 l. 61 % more or 50.5 l.

      Motor

      Peak torque 258 Nm and 173 Nm 33 % more or 85 Nm
      Torque measured at 1800 rev / min and 1700 rev / min 6 % more or 100 rev
      Full power 60 kW and 45 kW 25 % more or 15 kW
      Displacement 3.1 l. and 2.2 l. 29 % more or 0.9 l.

      Load-transfer device

      Tipping load 2700 kg and 2858 kg 6 % less or 158 kg

      Carrier

      Rolling bearings number on either side 4 and 3 25 % more or 1
      Caterpillar track width 457 mm and 320 mm 30 % more or 137 mm

      Neutral reasons:

      Sizes

      Width between caterpillar tracks 1810 mm and 1770 mm
      Length with bucket 3290 mm and 3708 mm
      Height to cab upper part 1920 mm and 2167 mm

      Operation

      Operating voltage 12 V and 12 V
      Working weight 3418 kg and 4350 kg

      Motor

      Manufacturer New Holland and Isuzu
      Model N844LT and 4JG1T
      Cylinders number 4 and 4
      Aspiration turbocharging and turbocharging

      Load-transfer device

      Workload 998 kg and 1350 kg

      Hydraulic system

      Overflow valve pressure 17926.4 kPa and 20600 kPa

      Carrier

      Caterpillar track length on ground level 1440 mm and 1499 mm
      Track width 1490 mm and 1313 mm

      Images

      Sizes

      2. Width between caterpillar tracks 1810 mm 2. Width between caterpillar tracks 1770 mm
      3. Height to cab upper part 1920 mm 3. Height to cab upper part 2167 mm
      5. Clearance 200 mm 5. Clearance 325 mm
      7. Ground clearance at maximum lifting and unloading 3700 mm 7. Ground clearance at maximum lifting and unloading 2408 mm
      8. Radius at maximum lifting and unloading 780 mm 8. Radius at maximum lifting and unloading 874 mm
      1. Length with bucket 3290 mm 1. Length with bucket 3708 mm

      Carrier

      4. Caterpillar track length on ground level 1440 mm 4. Caterpillar track length on ground level 1499 mm
      9. Track width 1490 mm 9. Track width 1313 mm