vs.

      Takeuchi TL120 vs. Case 420CT serie 3

      7 reasons to buy Takeuchi TL120:

      Sizes

      Ground clearance at maximum lifting and unloading 2905.7 mm and 2420 mm 17 % more or 485.7 mm

      Motor

      Power measured at 2800 rev / min and 2500 rev / min 11 % more or 300 rev
      Torque measured at 1680 rev / min and 1400 rev / min 17 % more or 280 rev

      Load-transfer device

      Tipping load 1609.8 kg and 2592.3 kg 38 % less or 982.5 kg

      Hydraulic system

      Pump flow rate 57.2 l/min and 90 l/min 36 % less or 32.8 l/min

      Carrier

      Specific ground pressure 31.7 kPa and 40 kPa 21 % less or 8.3 kPa
      Rolling bearings number on either side 4 and 3 25 % more or 1

      15 reasons to buy Case 420CT serie 3:

      Sizes

      Clearance 213 mm and 20.7 mm 90 % more or 192.3 mm
      Radius at maximum lifting and unloading 630 mm and 586.7 mm 7 % more or 43.3 mm
      Machine rear swing radius from center 1450 mm and 1501.1 mm 3 % less or 51.1 mm
      Turning radius with bucket from center 2050 mm and 2057.4 mm 0 % less or 7.4 mm

      Operation

      Fuel Capacity 83.3 l. and 57.9 l. 30 % more or 25.4 l.
      Cooling system fluid volume 11.4 l. and 11 l. 4 % more or 0.4 l.
      Engine oil volume 8.5 l. and 7.4 l. 13 % more or 1.1 l.
      Hydraulic system fluid volume 50 l. and 29.2 l. 42 % more or 20.8 l.
      Generator current strength 95 amperes and 40 amperes 58 % more or 55 amperes
      Maximum speed at low range 9.3 km/h and 6.4 km/h 31 % more or 2.9 km/h
      Maximum speed at high range 13.5 km/h and 9.3 km/h 31 % more or 4.2 km/h

      Motor

      Full power 55.2 kW and 38.8 kW 30 % more or 16.4 kW
      Peak torque 275.2 Nm and 166.8 Nm 39 % more or 108.4 Nm
      Displacement 3.2 l. and 2 l. 37 % more or 1.2 l.

      Carrier

      Caterpillar track width 320 mm and 296.4 mm 7 % more or 23.6 mm

      Neutral reasons:

      Sizes

      Width between caterpillar tracks 1470.7 mm and 1651 mm
      Length with bucket 3220.7 mm and 3290 mm
      Height to cab upper part 1971.1 mm and 2020 mm

      Operation

      Working weight 2699.8 kg and 3783 kg
      Operating voltage 12 V and 12 V

      Motor

      Manufacturer Yanmar and Case
      Model 4TNV84T and 432T/M3
      Cylinders number 4 and 4

      Load-transfer device

      Workload 565.2 kg and 1297.3 kg

      Carrier

      Caterpillar track length on ground level 1242.1 mm and 1438 mm

      Images

      Sizes

      1. Length with bucket 3220.7 mm 1. Length with bucket 3290 mm
      2. Width between caterpillar tracks 1470.7 mm 2. Width between caterpillar tracks 1651 mm
      3. Height to cab upper part 1971.1 mm 3. Height to cab upper part 2020 mm
      5. Clearance 20.7 mm 5. Clearance 213 mm
      7. Ground clearance at maximum lifting and unloading 2905.7 mm 7. Ground clearance at maximum lifting and unloading 2420 mm
      8. Radius at maximum lifting and unloading 586.7 mm 8. Radius at maximum lifting and unloading 630 mm

      Carrier

      4. Caterpillar track length on ground level 1242.1 mm 4. Caterpillar track length on ground level 1438 mm