vs.

      Takeuchi TL130 vs. Gehl CTL65

      7 reasons to buy Takeuchi TL130:

      Sizes

      Ground clearance at maximum lifting and unloading 3030.2 mm and 2370 mm 22 % more or 660.2 mm
      Radius at maximum lifting and unloading 731.5 mm and 730 mm 0 % more or 1.5 mm
      Turning radius with bucket from center 1585 mm and 2362 mm 33 % less or 777 mm

      Operation

      Hydraulic system fluid volume 40.1 l. and 38.6 l. 4 % more or 1.5 l.

      Motor

      Peak torque 245.4 Nm and 242.7 Nm 1 % more or 2.7 Nm

      Hydraulic system

      Pump flow rate 68.1 l/min and 69.5 l/min 2 % less or 1.4 l/min

      Carrier

      Rolling bearings number on either side 5 and 4 20 % more or 1

      8 reasons to buy Gehl CTL65:

      Sizes

      Clearance 310 mm and 309.9 mm 0 % more or 0.1 mm
      Machine rear swing radius from center 1549 mm and 2082.8 mm 26 % less or 533.8 mm

      Operation

      Maximum speed at low range 7.2 km/h and 7.1 km/h 1 % more or 0.1 km/h
      Maximum speed at high range 10.9 km/h and 10.1 km/h 7 % more or 0.8 km/h
      Cooling system fluid volume 16.5 l. and 10.9 l. 34 % more or 5.6 l.

      Motor

      Power measured at 2500 rev / min and 2450 rev / min 2 % more or 50 rev

      Load-transfer device

      Tipping load 2100 kg and 2100.1 kg 0 % less or 0.1 kg

      Carrier

      Caterpillar track width 8128 mm and 38.1 mm 100 % more or 8089.9 mm

      Neutral reasons:

      Sizes

      Height to cab upper part 2235.2 mm and 2123 mm
      Width between caterpillar tracks 1579.9 mm and 1580 mm
      Length with bucket 3431.5 mm and 3543 mm

      Operation

      Operating voltage 12 V and 12 V
      Generator current strength 40 amperes and 40 amperes
      Working weight 3400.6 kg and 3635 kg
      Fuel Capacity 75 l. and 75 l.
      Engine oil volume 10.2 l. and 10.2 l.

      Motor

      Displacement 3.3 l. and 3.3 l.
      Cylinders number 4 and 4
      Manufacturer Yanmar and Yanmar
      Model 4TNV98 and 4TNV98
      Full power 50 kW and 50 kW
      Torque measured at 1600 rev / min and 1600 rev / min

      Load-transfer device

      Workload 734.8 kg and 1050 kg

      Hydraulic system

      Overflow valve pressure 20587.7 kPa and 20601.5 kPa

      Carrier

      Specific ground pressure 33.5 kPa and 33.5 kPa
      Caterpillar track length on ground level 1389.4 mm and 423367.2 mm

      Images

      Sizes

      1. Length with bucket 3431.5 mm 1. Length with bucket 3543 mm
      2. Width between caterpillar tracks 1579.9 mm 2. Width between caterpillar tracks 1580 mm
      3. Height to cab upper part 2235.2 mm 3. Height to cab upper part 2123 mm
      5. Clearance 309.9 mm 5. Clearance 310 mm
      7. Ground clearance at maximum lifting and unloading 3030.2 mm 7. Ground clearance at maximum lifting and unloading 2370 mm
      8. Radius at maximum lifting and unloading 731.5 mm 8. Radius at maximum lifting and unloading 730 mm

      Carrier

      4. Caterpillar track length on ground level 1389.4 mm 4. Caterpillar track length on ground level 423367.2 mm