vs.

      Takeuchi TL130 vs. Mustang MTL20

      9 reasons to buy Takeuchi TL130:

      Sizes

      Ground clearance at maximum lifting and unloading 3030.2 mm and 2408 mm 21 % more or 622.2 mm
      Turning radius with bucket from center 1585 mm and 2294 mm 31 % less or 709 mm

      Operation

      Engine oil volume 10.2 l. and 9.4 l. 8 % more or 0.8 l.

      Motor

      Displacement 3.3 l. and 3.1 l. 6 % more or 0.2 l.
      Power measured at 2450 rev / min and 2400 rev / min 2 % more or 50 rev

      Load-transfer device

      Tipping load 2100.1 kg and 2700 kg 22 % less or 599.9 kg
      Breakout power 3051.8 kg and 3357 kg 9 % less or 305.2 kg

      Hydraulic system

      Pump flow rate 68.1 l/min and 75 l/min 9 % less or 6.9 l/min

      Carrier

      Rolling bearings number on either side 5 and 4 20 % more or 1

      14 reasons to buy Mustang MTL20:

      Sizes

      Clearance 325 mm and 309.9 mm 5 % more or 15.1 mm
      Radius at maximum lifting and unloading 874 mm and 731.5 mm 16 % more or 142.5 mm
      Machine rear swing radius from center 1666 mm and 2082.8 mm 20 % less or 416.8 mm

      Operation

      Fuel Capacity 90 l. and 75 l. 17 % more or 15 l.
      Cooling system fluid volume 15.1 l. and 10.9 l. 28 % more or 4.2 l.
      Hydraulic system fluid volume 83 l. and 40.1 l. 52 % more or 42.9 l.
      Generator current strength 50 amperes and 40 amperes 20 % more or 10 amperes
      Maximum speed at low range 7.2 km/h and 7.1 km/h 1 % more or 0.1 km/h
      Maximum speed at high range 10.3 km/h and 10.1 km/h 2 % more or 0.2 km/h

      Motor

      Full power 60 kW and 50 kW 17 % more or 10 kW
      Peak torque 258 Nm and 245.4 Nm 5 % more or 12.6 Nm
      Torque measured at 1800 rev / min and 1600 rev / min 11 % more or 200 rev

      Carrier

      Specific ground pressure 28.3 kPa and 33.5 kPa 16 % less or 5.2 kPa
      Caterpillar track width 457 mm and 38.1 mm 92 % more or 418.9 mm

      Neutral reasons:

      Sizes

      Width between caterpillar tracks 1579.9 mm and 1770 mm
      Length with bucket 3431.5 mm and 3708 mm
      Height to cab upper part 2235.2 mm and 2167 mm

      Operation

      Working weight 3400.6 kg and 4350 kg
      Operating voltage 12 V and 12 V

      Motor

      Cylinders number 4 and 4
      Manufacturer Yanmar and Isuzu
      Model 4TNV98 and 4JG1T

      Load-transfer device

      Workload 734.8 kg and 1350 kg

      Hydraulic system

      Overflow valve pressure 20587.7 kPa and 20600 kPa

      Carrier

      Caterpillar track length on ground level 1389.4 mm and 1499 mm

      Images

      Sizes

      7. Ground clearance at maximum lifting and unloading 3030.2 mm 7. Ground clearance at maximum lifting and unloading 2408 mm
      8. Radius at maximum lifting and unloading 731.5 mm 8. Radius at maximum lifting and unloading 874 mm
      1. Length with bucket 3431.5 mm 1. Length with bucket 3708 mm
      2. Width between caterpillar tracks 1579.9 mm 2. Width between caterpillar tracks 1770 mm
      3. Height to cab upper part 2235.2 mm 3. Height to cab upper part 2167 mm
      5. Clearance 309.9 mm 5. Clearance 325 mm

      Carrier

      4. Caterpillar track length on ground level 1389.4 mm 4. Caterpillar track length on ground level 1499 mm