vs.

      Takeuchi TL130 vs. Takeuchi TL140

      6 reasons to buy Takeuchi TL130:

      Sizes

      Turning radius with bucket from center 1585 mm and 2293.6 mm 31 % less or 708.6 mm

      Operation

      Engine oil volume 10.2 l. and 9.6 l. 6 % more or 0.6 l.

      Motor

      Displacement 3.3 l. and 3.1 l. 6 % more or 0.2 l.

      Load-transfer device

      Tipping load 2100.1 kg and 2699.8 kg 22 % less or 599.7 kg
      Breakout power 3051.8 kg and 3357.9 kg 9 % less or 306.1 kg

      Hydraulic system

      Pump flow rate 68.1 l/min and 75 l/min 9 % less or 6.9 l/min

      16 reasons to buy Takeuchi TL140:

      Sizes

      Clearance 325.1 mm and 309.9 mm 5 % more or 15.2 mm
      Ground clearance at maximum lifting and unloading 3121.7 mm and 3030.2 mm 3 % more or 91.5 mm
      Radius at maximum lifting and unloading 873.8 mm and 731.5 mm 16 % more or 142.3 mm
      Machine rear swing radius from center 1666.2 mm and 2082.8 mm 20 % less or 416.6 mm

      Operation

      Fuel Capacity 90.1 l. and 75 l. 17 % more or 15.1 l.
      Cooling system fluid volume 15.1 l. and 10.9 l. 28 % more or 4.2 l.
      Hydraulic system fluid volume 51.9 l. and 40.1 l. 23 % more or 11.8 l.
      Generator current strength 50 amperes and 40 amperes 20 % more or 10 amperes
      Maximum speed at low range 7.4 km/h and 7.1 km/h 4 % more or 0.3 km/h
      Maximum speed at high range 10.6 km/h and 10.1 km/h 5 % more or 0.5 km/h

      Motor

      Torque measured at 1800 rev / min and 1600 rev / min 11 % more or 200 rev
      Power measured at 2500 rev / min and 2450 rev / min 2 % more or 50 rev
      Peak torque 261.7 Nm and 245.4 Nm 6 % more or 16.3 Nm
      Full power 60.4 kW and 50 kW 17 % more or 10.4 kW

      Carrier

      Caterpillar track width 457.2 mm and 38.1 mm 92 % more or 419.1 mm
      Specific ground pressure 28.3 kPa and 33.5 kPa 16 % less or 5.2 kPa

      Neutral reasons:

      Sizes

      Width between caterpillar tracks 1579.9 mm and 1770.4 mm
      Length with bucket 3431.5 mm and 3708.4 mm
      Height to cab upper part 2235.2 mm and 2270.8 mm

      Operation

      Working weight 3400.6 kg and 4350 kg
      Operating voltage 12 V and 12 V

      Motor

      Cylinders number 4 and 4
      Manufacturer Yanmar and Isuzu
      Model 4TNV98 and 4JG1T

      Load-transfer device

      Workload 734.8 kg and 944.8 kg

      Hydraulic system

      Overflow valve pressure 20587.7 kPa and 20601.5 kPa

      Carrier

      Caterpillar track length on ground level 1389.4 mm and 1496 mm
      Rolling bearings number on either side 5 and 5

      Images

      Sizes

      2. Width between caterpillar tracks 1579.9 mm 2. Width between caterpillar tracks 1770.4 mm
      3. Height to cab upper part 2235.2 mm 3. Height to cab upper part 2270.8 mm
      5. Clearance 309.9 mm 5. Clearance 325.1 mm
      7. Ground clearance at maximum lifting and unloading 3030.2 mm 7. Ground clearance at maximum lifting and unloading 3121.7 mm
      8. Radius at maximum lifting and unloading 731.5 mm 8. Radius at maximum lifting and unloading 873.8 mm
      1. Length with bucket 3431.5 mm 1. Length with bucket 3708.4 mm

      Carrier

      4. Caterpillar track length on ground level 1389.4 mm 4. Caterpillar track length on ground level 1496 mm