vs.

      Takeuchi TL130 vs. Takeuchi TL250

      4 reasons to buy Takeuchi TL130:

      Sizes

      Turning radius with bucket from center 1585 mm and 2435 mm 35 % less or 850 mm
      Ground clearance at maximum lifting and unloading 3030.2 mm and 2430 mm 20 % more or 600.2 mm

      Load-transfer device

      Tipping load 2100.1 kg and 3200 kg 34 % less or 1099.9 kg

      Hydraulic system

      Pump flow rate 68.1 l/min and 88.7 l/min 23 % less or 20.6 l/min

      17 reasons to buy Takeuchi TL250:

      Sizes

      Radius at maximum lifting and unloading 985 mm and 731.5 mm 26 % more or 253.5 mm
      Machine rear swing radius from center 1755 mm and 2082.8 mm 16 % less or 327.8 mm
      Clearance 345 mm and 309.9 mm 10 % more or 35.1 mm

      Operation

      Maximum speed at low range 7.8 km/h and 7.1 km/h 9 % more or 0.7 km/h
      Maximum speed at high range 12 km/h and 10.1 km/h 16 % more or 1.9 km/h
      Fuel Capacity 108 l. and 75 l. 31 % more or 33 l.
      Cooling system fluid volume 16.5 l. and 10.9 l. 34 % more or 5.6 l.
      Engine oil volume 13.2 l. and 10.2 l. 23 % more or 3.0 l.
      Hydraulic system fluid volume 65 l. and 40.1 l. 38 % more or 24.9 l.
      Generator current strength 80 amperes and 40 amperes 50 % more or 40 amperes

      Motor

      Power measured at 2600 rev / min and 2450 rev / min 6 % more or 150 rev
      Displacement 3.8 l. and 3.3 l. 13 % more or 0.5 l.
      Peak torque 325.4 Nm and 245.4 Nm 25 % more or 80.0 Nm
      Full power 73.1 kW and 50 kW 32 % more or 23.1 kW

      Carrier

      Specific ground pressure 33.1 kPa and 33.5 kPa 1 % less or 0.4 kPa
      Rolling bearings number on either side 6 and 5 17 % more or 1
      Caterpillar track width 450 mm and 38.1 mm 92 % more or 411.9 mm

      Neutral reasons:

      Sizes

      Width between caterpillar tracks 1579.9 mm and 1860 mm
      Length with bucket 3431.5 mm and 4038 mm
      Height to cab upper part 2235.2 mm and 2320 mm

      Operation

      Working weight 3400.6 kg and 5400 kg
      Operating voltage 12 V and 12 V

      Motor

      Cylinders number 4 and 4
      Torque measured at 1600 rev / min and 1600 rev / min
      Manufacturer Yanmar and Kubota
      Model 4TNV98 and V3800DI

      Load-transfer device

      Workload 734.8 kg and 1092 kg

      Hydraulic system

      Overflow valve pressure 20587.7 kPa and 20684.3 kPa

      Carrier

      Caterpillar track length on ground level 1389.4 mm and 1598 mm

      Images

      Sizes

      8. Radius at maximum lifting and unloading 731.5 mm 8. Radius at maximum lifting and unloading 985 mm
      1. Length with bucket 3431.5 mm 1. Length with bucket 4038 mm
      2. Width between caterpillar tracks 1579.9 mm 2. Width between caterpillar tracks 1860 mm
      3. Height to cab upper part 2235.2 mm 3. Height to cab upper part 2320 mm
      5. Clearance 309.9 mm 5. Clearance 345 mm
      7. Ground clearance at maximum lifting and unloading 3030.2 mm 7. Ground clearance at maximum lifting and unloading 2430 mm

      Carrier

      4. Caterpillar track length on ground level 1389.4 mm 4. Caterpillar track length on ground level 1598 mm