vs.

      Takeuchi TL140 vs. Gehl CTL60

      16 reasons to buy Takeuchi TL140:

      Sizes

      Radius at maximum lifting and unloading 873.8 mm and 851 mm 3 % more or 22.8 mm
      Turning radius with bucket from center 2293.6 mm and 2362 mm 3 % less or 68.4 mm
      Clearance 325.1 mm and 310 mm 5 % more or 15.1 mm
      Ground clearance at maximum lifting and unloading 3121.7 mm and 2370 mm 24 % more or 751.7 mm

      Operation

      Maximum speed at low range 7.4 km/h and 7.2 km/h 3 % more or 0.2 km/h
      Maximum speed at high range 10.6 km/h and 10.1 km/h 5 % more or 0.5 km/h
      Fuel Capacity 90.1 l. and 75 l. 17 % more or 15.1 l.
      Cooling system fluid volume 15.1 l. and 11 l. 27 % more or 4.1 l.
      Hydraulic system fluid volume 51.9 l. and 38.6 l. 26 % more or 13.3 l.
      Generator current strength 50 amperes and 40 amperes 20 % more or 10 amperes

      Motor

      Power measured at 2500 rev / min and 2450 rev / min 2 % more or 50 rev
      Peak torque 261.7 Nm and 245.4 Nm 6 % more or 16.3 Nm
      Torque measured at 1800 rev / min and 1600 rev / min 11 % more or 200 rev

      Carrier

      Specific ground pressure 28.3 kPa and 33.5 kPa 16 % less or 5.2 kPa
      Rolling bearings number on either side 5 and 4 20 % more or 1
      Caterpillar track width 457.2 mm and 320 mm 30 % more or 137.2 mm

      6 reasons to buy Gehl CTL60:

      Sizes

      Machine rear swing radius from center 1549 mm and 1666.2 mm 7 % less or 117.2 mm

      Operation

      Engine oil volume 10.2 l. and 9.6 l. 6 % more or 0.6 l.

      Motor

      Displacement 3.3 l. and 3.1 l. 6 % more or 0.2 l.

      Load-transfer device

      Tipping load 2100.1 kg and 2699.8 kg 22 % less or 599.7 kg
      Breakout power 3051.8 kg and 3357.9 kg 9 % less or 306.1 kg

      Hydraulic system

      Pump flow rate 68.1 l/min and 75 l/min 9 % less or 6.9 l/min

      Neutral reasons:

      Sizes

      Width between caterpillar tracks 1770.4 mm and 1580 mm
      Length with bucket 3708.4 mm and 3543 mm
      Height to cab upper part 2270.8 mm and 2123 mm

      Operation

      Working weight 4350 kg and 3400.6 kg
      Operating voltage 12 V and 12 V

      Motor

      Model 4JG1T and 4TNV98
      Manufacturer Isuzu and Yanmar
      Cylinders number 4 and 4

      Load-transfer device

      Workload 944.8 kg and 1050.1 kg

      Hydraulic system

      Overflow valve pressure 20601.5 kPa and 20601.5 kPa

      Carrier

      Caterpillar track length on ground level 1496 mm and 1389 mm

      Images

      Sizes

      3. Height to cab upper part 2270.8 mm 3. Height to cab upper part 2123 mm
      5. Clearance 325.1 mm 5. Clearance 310 mm
      7. Ground clearance at maximum lifting and unloading 3121.7 mm 7. Ground clearance at maximum lifting and unloading 2370 mm
      8. Radius at maximum lifting and unloading 873.8 mm 8. Radius at maximum lifting and unloading 851 mm
      1. Length with bucket 3708.4 mm 1. Length with bucket 3543 mm
      2. Width between caterpillar tracks 1770.4 mm 2. Width between caterpillar tracks 1580 mm

      Carrier

      4. Caterpillar track length on ground level 1496 mm 4. Caterpillar track length on ground level 1389 mm