vs.

      Takeuchi TL140 vs. Takeuchi TL130

      16 reasons to buy Takeuchi TL140:

      Sizes

      Clearance 325.1 mm and 309.9 mm 5 % more or 15.2 mm
      Ground clearance at maximum lifting and unloading 3121.7 mm and 3030.2 mm 3 % more or 91.5 mm
      Radius at maximum lifting and unloading 873.8 mm and 731.5 mm 16 % more or 142.3 mm
      Machine rear swing radius from center 1666.2 mm and 2082.8 mm 20 % less or 416.6 mm

      Operation

      Fuel Capacity 90.1 l. and 75 l. 17 % more or 15.1 l.
      Cooling system fluid volume 15.1 l. and 10.9 l. 28 % more or 4.2 l.
      Hydraulic system fluid volume 51.9 l. and 40.1 l. 23 % more or 11.8 l.
      Generator current strength 50 amperes and 40 amperes 20 % more or 10 amperes
      Maximum speed at low range 7.4 km/h and 7.1 km/h 4 % more or 0.3 km/h
      Maximum speed at high range 10.6 km/h and 10.1 km/h 5 % more or 0.5 km/h

      Motor

      Full power 60.4 kW and 50 kW 17 % more or 10.4 kW
      Power measured at 2500 rev / min and 2450 rev / min 2 % more or 50 rev
      Peak torque 261.7 Nm and 245.4 Nm 6 % more or 16.3 Nm
      Torque measured at 1800 rev / min and 1600 rev / min 11 % more or 200 rev

      Carrier

      Specific ground pressure 28.3 kPa and 33.5 kPa 16 % less or 5.2 kPa
      Caterpillar track width 457.2 mm and 38.1 mm 92 % more or 419.1 mm

      6 reasons to buy Takeuchi TL130:

      Sizes

      Turning radius with bucket from center 1585 mm and 2293.6 mm 31 % less or 708.6 mm

      Operation

      Engine oil volume 10.2 l. and 9.6 l. 6 % more or 0.6 l.

      Motor

      Displacement 3.3 l. and 3.1 l. 6 % more or 0.2 l.

      Load-transfer device

      Tipping load 2100.1 kg and 2699.8 kg 22 % less or 599.7 kg
      Breakout power 3051.8 kg and 3357.9 kg 9 % less or 306.1 kg

      Hydraulic system

      Pump flow rate 68.1 l/min and 75 l/min 9 % less or 6.9 l/min

      Neutral reasons:

      Sizes

      Width between caterpillar tracks 1770.4 mm and 1579.9 mm
      Length with bucket 3708.4 mm and 3431.5 mm
      Height to cab upper part 2270.8 mm and 2235.2 mm

      Operation

      Operating voltage 12 V and 12 V
      Working weight 4350 kg and 3400.6 kg

      Motor

      Model 4JG1T and 4TNV98
      Manufacturer Isuzu and Yanmar
      Cylinders number 4 and 4

      Load-transfer device

      Workload 944.8 kg and 734.8 kg

      Hydraulic system

      Overflow valve pressure 20601.5 kPa and 20587.7 kPa

      Carrier

      Rolling bearings number on either side 5 and 5
      Caterpillar track length on ground level 1496 mm and 1389.4 mm

      Images

      Sizes

      3. Height to cab upper part 2270.8 mm 3. Height to cab upper part 2235.2 mm
      5. Clearance 325.1 mm 5. Clearance 309.9 mm
      7. Ground clearance at maximum lifting and unloading 3121.7 mm 7. Ground clearance at maximum lifting and unloading 3030.2 mm
      8. Radius at maximum lifting and unloading 873.8 mm 8. Radius at maximum lifting and unloading 731.5 mm
      1. Length with bucket 3708.4 mm 1. Length with bucket 3431.5 mm
      2. Width between caterpillar tracks 1770.4 mm 2. Width between caterpillar tracks 1579.9 mm

      Carrier

      4. Caterpillar track length on ground level 1496 mm 4. Caterpillar track length on ground level 1389.4 mm