- Home/
- Comparison/
- Rough Terrain Truck/
- Takeuchi TL150 vs. Mustang MTL16
Takeuchi TL150 vs. Mustang MTL16
16 reasons to buy Takeuchi TL150:
Sizes
| Radius at maximum lifting and unloading | 985.5 mm and 851 mm | 14 % more or 134.5 mm |
| Clearance | 335.3 mm and 310 mm | 8 % more or 25.3 mm |
| Ground clearance at maximum lifting and unloading | 3202.9 mm and 2370 mm | 26 % more or 832.9 mm |
Operation
| Maximum speed at low range | 7.7 km/h and 7.2 km/h | 6 % more or 0.5 km/h |
| Maximum speed at high range | 11.1 km/h and 10.1 km/h | 9 % more or 1.0 km/h |
| Fuel Capacity | 107.9 l. and 75 l. | 30 % more or 32.9 l. |
| Cooling system fluid volume | 15.1 l. and 11 l. | 27 % more or 4.1 l. |
| Engine oil volume | 14 l. and 10.2 l. | 27 % more or 3.8 l. |
| Hydraulic system fluid volume | 64 l. and 59.8 l. | 7 % more or 4.2 l. |
| Generator current strength | 60 amperes and 40 amperes | 33 % more or 20 amperes |
Motor
| Peak torque | 394.5 Nm and 244 Nm | 38 % more or 150.5 Nm |
| Displacement | 4.4 l. and 3.3 l. | 25 % more or 1.1 l. |
| Full power | 72.3 kW and 49 kW | 32 % more or 23.3 kW |
Carrier
| Rolling bearings number on either side | 6 and 4 | 33 % more or 2 |
| Specific ground pressure | 29.6 kPa and 33.5 kPa | 12 % less or 3.9 kPa |
| Caterpillar track width | 457.2 mm and 320 mm | 30 % more or 137.2 mm |
7 reasons to buy Mustang MTL16:
Sizes
| Machine rear swing radius from center | 1549 mm and 1745 mm | 11 % less or 196 mm |
| Turning radius with bucket from center | 2362 mm and 2433.3 mm | 3 % less or 71.3 mm |
Motor
| Torque measured at | 1600 rev / min and 1400 rev / min | 12 % more or 200 rev |
| Power measured at | 2400 rev / min and 2200 rev / min | 8 % more or 200 rev |
Load-transfer device
| Tipping load | 2100 kg and 3200.5 kg | 34 % less or 1100.5 kg |
| Breakout power | 3051 kg and 3942.6 kg | 23 % less or 891.6 kg |
Hydraulic system
| Pump flow rate | 68 l/min and 88.6 l/min | 23 % less or 20.6 l/min |
Neutral reasons:
Sizes
| Width between caterpillar tracks | 1859.3 mm and 1580 mm |
| Length with bucket | 3931.9 mm and 3543 mm |
| Height to cab upper part | 2319 mm and 2123 mm |
Operation
| Working weight | 4945.1 kg and 3401 kg |
| Operating voltage | 12 V and 12 V |
Motor
| Cylinders number | 4 and 4 |
| Manufacturer | Yanmar and Yanmar |
| Model | 4TNV106T and 4TNV98 |
Load-transfer device
| Workload | 1120.4 kg and 1050 kg |
Hydraulic system
| Overflow valve pressure | 20587.7 kPa and 20600 kPa |
Carrier
| Caterpillar track length on ground level | 1597.7 mm and 1389 mm |
Images
Sizes
| 1. Length with bucket | 3931.9 mm | 1. Length with bucket | 3543 mm |
| 2. Width between caterpillar tracks | 1859.3 mm | 2. Width between caterpillar tracks | 1580 mm |
| 3. Height to cab upper part | 2319 mm | 3. Height to cab upper part | 2123 mm |
| 5. Clearance | 335.3 mm | 5. Clearance | 310 mm |
| 7. Ground clearance at maximum lifting and unloading | 3202.9 mm | 7. Ground clearance at maximum lifting and unloading | 2370 mm |
| 8. Radius at maximum lifting and unloading | 985.5 mm | 8. Radius at maximum lifting and unloading | 851 mm |
Carrier
| 4. Caterpillar track length on ground level | 1597.7 mm | 4. Caterpillar track length on ground level | 1389 mm |