vs.

      Takeuchi TL220 vs. Case 440CT serie 3

      8 reasons to buy Takeuchi TL220:

      Sizes

      Turning radius with bucket from center 1996 mm and 2020 mm 1 % less or 24 mm
      Clearance 250 mm and 236 mm 6 % more or 14 mm

      Operation

      Hydraulic system fluid volume 45 l. and 26.9 l. 40 % more or 18.1 l.

      Motor

      Torque measured at 2000 rev / min and 1300 rev / min 35 % more or 700 rev
      Power measured at 2800 rev / min and 2300 rev / min 18 % more or 500 rev

      Load-transfer device

      Tipping load 1610 kg and 2721.6 kg 41 % less or 1111.6 kg

      Hydraulic system

      Pump flow rate 57 l/min and 83 l/min 31 % less or 26 l/min

      Carrier

      Rolling bearings number on either side 4 and 3 25 % more or 1

      14 reasons to buy Case 440CT serie 3:

      Sizes

      Ground clearance at maximum lifting and unloading 2430 mm and 2275 mm 6 % more or 155 mm
      Radius at maximum lifting and unloading 620 mm and 590 mm 5 % more or 30 mm
      Machine rear swing radius from center 1450 mm and 1470 mm 1 % less or 20 mm

      Operation

      Fuel Capacity 88.2 l. and 57 l. 35 % more or 31.2 l.
      Cooling system fluid volume 11.4 l. and 11 l. 4 % more or 0.4 l.
      Engine oil volume 12 l. and 7.4 l. 38 % more or 4.6 l.
      Generator current strength 95 amperes and 40 amperes 58 % more or 55 amperes
      Maximum speed at low range 8.2 km/h and 6.5 km/h 21 % more or 1.7 km/h
      Maximum speed at high range 12.9 km/h and 9.3 km/h 28 % more or 3.6 km/h

      Motor

      Displacement 4.5 l. and 2 l. 56 % more or 2.5 l.
      Full power 67.1 kW and 39.9 kW 41 % more or 27.2 kW
      Peak torque 390.5 Nm and 162.7 Nm 58 % more or 227.8 Nm
      Effective power 61.9 kW and 38.2 kW 38 % more or 23.7 kW

      Carrier

      Caterpillar track width 400 mm and 300 mm 25 % more or 100 mm

      Neutral reasons:

      Sizes

      Width between caterpillar tracks 1470 mm and 1812 mm
      Length with bucket 3251 mm and 3290 mm
      Height to cab upper part 1970 mm and 2050 mm

      Operation

      Working weight 6500 kg and 4048.3 kg
      Operating voltage 12 V and 12 V

      Motor

      Manufacturer Yanmar and Case
      Cylinders number 4 and 4
      Model 4TNV84 and 445T/M3
      Aspiration turbocharging and turbocharging

      Load-transfer device

      Workload 565 kg and 1360.8 kg

      Carrier

      Caterpillar track length on ground level 1240 mm and 1438 mm
      Specific ground pressure 34.5 kPa and 34.5 kPa

      Images

      Sizes

      1. Length with bucket 3251 mm 1. Length with bucket 3290 mm
      2. Width between caterpillar tracks 1470 mm 2. Width between caterpillar tracks 1812 mm
      3. Height to cab upper part 1970 mm 3. Height to cab upper part 2050 mm
      5. Clearance 250 mm 5. Clearance 236 mm
      7. Ground clearance at maximum lifting and unloading 2275 mm 7. Ground clearance at maximum lifting and unloading 2430 mm
      8. Radius at maximum lifting and unloading 590 mm 8. Radius at maximum lifting and unloading 620 mm

      Carrier

      4. Caterpillar track length on ground level 1240 mm 4. Caterpillar track length on ground level 1438 mm