vs.

      Takeuchi TL240 vs. Gehl CTL60

      15 reasons to buy Takeuchi TL240:

      Sizes

      Radius at maximum lifting and unloading 875 mm and 851 mm 3 % more or 24 mm
      Clearance 325 mm and 310 mm 5 % more or 15 mm
      Ground clearance at maximum lifting and unloading 2408 mm and 2370 mm 2 % more or 38 mm

      Operation

      Maximum speed at low range 7.6 km/h and 7.2 km/h 5 % more or 0.4 km/h
      Hydraulic system fluid volume 75 l. and 38.6 l. 49 % more or 36.4 l.
      Maximum speed at high range 11.6 km/h and 10.1 km/h 13 % more or 1.5 km/h
      Fuel Capacity 90 l. and 75 l. 17 % more or 15 l.
      Cooling system fluid volume 16.5 l. and 11 l. 33 % more or 5.5 l.

      Motor

      Effective power 61.9 kW and 49.2 kW 21 % more or 12.7 kW
      Torque measured at 1850 rev / min and 1600 rev / min 14 % more or 250 rev
      Power measured at 2500 rev / min and 2450 rev / min 2 % more or 50 rev
      Peak torque 296.9 Nm and 245.4 Nm 17 % more or 51.5 Nm

      Carrier

      Specific ground pressure 30.3 kPa and 33.5 kPa 10 % less or 3.2 kPa
      Rolling bearings number on either side 5 and 4 20 % more or 1
      Caterpillar track width 450 mm and 320 mm 29 % more or 130 mm

      3 reasons to buy Gehl CTL60:

      Sizes

      Machine rear swing radius from center 1549 mm and 1670 mm 7 % less or 121 mm

      Load-transfer device

      Tipping load 2100.1 kg and 2699 kg 22 % less or 598.9 kg

      Hydraulic system

      Pump flow rate 68.1 l/min and 76 l/min 10 % less or 7.9 l/min

      Neutral reasons:

      Sizes

      Height to cab upper part 2270 mm and 2123 mm
      Turning radius with bucket from center 2362 mm and 2362 mm
      Width between caterpillar tracks 1770 mm and 1580 mm
      Length with bucket 3810 mm and 3543 mm

      Operation

      Operating voltage 12 V and 12 V
      Generator current strength 40 amperes and 40 amperes
      Working weight 4701 kg and 3400.6 kg
      Engine oil volume 10.2 l. and 10.2 l.

      Motor

      Manufacturer Yanmar and Yanmar
      Model 4TNV98I and 4TNV98
      Displacement 3.3 l. and 3.3 l.
      Cylinders number 4 and 4
      Aspiration turbocharging and natural aspiration

      Load-transfer device

      Workload 944 kg and 1050.1 kg

      Hydraulic system

      Overflow valve pressure 20684.3 kPa and 20601.5 kPa

      Carrier

      Caterpillar track length on ground level 1495 mm and 1389 mm

      Images

      Sizes

      1. Length with bucket 3810 mm 1. Length with bucket 3543 mm
      2. Width between caterpillar tracks 1770 mm 2. Width between caterpillar tracks 1580 mm
      3. Height to cab upper part 2270 mm 3. Height to cab upper part 2123 mm
      5. Clearance 325 mm 5. Clearance 310 mm
      7. Ground clearance at maximum lifting and unloading 2408 mm 7. Ground clearance at maximum lifting and unloading 2370 mm
      8. Radius at maximum lifting and unloading 875 mm 8. Radius at maximum lifting and unloading 851 mm

      Carrier

      4. Caterpillar track length on ground level 1495 mm 4. Caterpillar track length on ground level 1389 mm