vs.

      Takeuchi TL240 vs. Volvo MCT135C

      9 reasons to buy Takeuchi TL240:

      Sizes

      Clearance 325 mm and 248 mm 24 % more or 77 mm
      Ground clearance at maximum lifting and unloading 2408 mm and 2390 mm 1 % more or 18 mm
      Machine rear swing radius from center 1670 mm and 1760 mm 5 % less or 90 mm

      Operation

      Cooling system fluid volume 16.5 l. and 15.5 l. 6 % more or 1.0 l.
      Hydraulic system fluid volume 75 l. and 60 l. 20 % more or 15 l.

      Motor

      Power measured at 2500 rev / min and 2200 rev / min 12 % more or 300 rev
      Torque measured at 1850 rev / min and 1800 rev / min 3 % more or 50 rev

      Load-transfer device

      Tipping load 2699 kg and 3913.6 kg 31 % less or 1214.6 kg

      Hydraulic system

      Pump flow rate 76 l/min and 87 l/min 13 % less or 11 l/min

      11 reasons to buy Volvo MCT135C:

      Sizes

      Radius at maximum lifting and unloading 900 mm and 875 mm 3 % more or 25 mm
      Turning radius with bucket from center 1760 mm and 2362 mm 25 % less or 602 mm

      Operation

      Fuel Capacity 103 l. and 90 l. 13 % more or 13 l.
      Engine oil volume 15 l. and 10.2 l. 32 % more or 4.8 l.
      Generator current strength 95 amperes and 40 amperes 58 % more or 55 amperes
      Maximum speed at low range 9.2 km/h and 7.6 km/h 17 % more or 1.6 km/h
      Maximum speed at high range 12.6 km/h and 11.6 km/h 8 % more or 1.0 km/h

      Motor

      Effective power 68.6 kW and 61.9 kW 10 % more or 6.7 kW
      Displacement 4.4 l. and 3.3 l. 25 % more or 1.1 l.
      Peak torque 408.1 Nm and 296.9 Nm 27 % more or 111.2 Nm
      Full power 68.6 kW and 64.1 kW 7 % more or 4.5 kW

      Neutral reasons:

      Sizes

      Width between caterpillar tracks 1770 mm and 1980 mm
      Length with bucket 3810 mm and 3780 mm
      Height to cab upper part 2270 mm and 2080 mm

      Operation

      Working weight 4701 kg and 4836.7 kg
      Operating voltage 12 V and 12 V

      Motor

      Cylinders number 4 and 4
      Aspiration turbocharging and turbocharging
      Manufacturer Yanmar and JCB
      Model 4TNV98I and TC63

      Load-transfer device

      Workload 944 kg and 1360.8 kg

      Hydraulic system

      Overflow valve pressure 20684.3 kPa and 22994 kPa

      Carrier

      Caterpillar track width 450 mm and 450 mm

      Images

      Sizes

      1. Length with bucket 3810 mm 1. Length with bucket 3780 mm
      2. Width between caterpillar tracks 1770 mm 2. Width between caterpillar tracks 1980 mm
      3. Height to cab upper part 2270 mm 3. Height to cab upper part 2080 mm
      5. Clearance 325 mm 5. Clearance 248 mm
      7. Ground clearance at maximum lifting and unloading 2408 mm 7. Ground clearance at maximum lifting and unloading 2390 mm
      8. Radius at maximum lifting and unloading 875 mm 8. Radius at maximum lifting and unloading 900 mm