vs.

      Takeuchi TL250 vs. Case 445CT

      12 reasons to buy Takeuchi TL250:

      Sizes

      Clearance 345 mm and 229 mm 34 % more or 116 mm
      Ground clearance at maximum lifting and unloading 2430 mm and 2340 mm 4 % more or 90 mm
      Radius at maximum lifting and unloading 985 mm and 860 mm 13 % more or 125 mm

      Operation

      Engine oil volume 13.2 l. and 12 l. 9 % more or 1.2 l.
      Hydraulic system fluid volume 65 l. and 41.5 l. 36 % more or 23.5 l.
      Fuel Capacity 108 l. and 65.5 l. 39 % more or 42.5 l.

      Motor

      Power measured at 2600 rev / min and 2300 rev / min 12 % more or 300 rev
      Peak torque 325.4 Nm and 320 Nm 2 % more or 5.4 Nm
      Torque measured at 1600 rev / min and 1400 rev / min 12 % more or 200 rev
      Full power 73.1 kW and 60 kW 18 % more or 13.1 kW
      Effective power 68.6 kW and 55.2 kW 20 % more or 13.4 kW

      Carrier

      Rolling bearings number on either side 6 and 4 33 % more or 2

      10 reasons to buy Case 445CT:

      Sizes

      Machine rear swing radius from center 1550 mm and 1755 mm 12 % less or 205 mm
      Turning radius with bucket from center 2130 mm and 2435 mm 13 % less or 305 mm

      Operation

      Generator current strength 95 amperes and 80 amperes 16 % more or 15 amperes
      Maximum speed at low range 8.2 km/h and 7.8 km/h 5 % more or 0.4 km/h
      Maximum speed at high range 12.8 km/h and 12 km/h 6 % more or 0.8 km/h
      Cooling system fluid volume 17 l. and 16.5 l. 3 % more or 0.5 l.

      Motor

      Displacement 4.5 l. and 3.8 l. 16 % more or 0.7 l.

      Load-transfer device

      Tipping load 3175 kg and 3200 kg 1 % less or 25 kg

      Hydraulic system

      Pump flow rate 80 l/min and 88.7 l/min 10 % less or 8.7 l/min

      Carrier

      Specific ground pressure 27.6 kPa and 33.1 kPa 17 % less or 5.5 kPa

      Neutral reasons:

      Sizes

      Width between caterpillar tracks 1860 mm and 2098 mm
      Length with bucket 4038 mm and 3440 mm
      Height to cab upper part 2320 mm and 2030 mm

      Operation

      Operating voltage 12 V and 12 V
      Working weight 5400 kg and 4452 kg

      Motor

      Manufacturer Kubota and Case
      Cylinders number 4 and 4
      Model V3800DI and Family III 445/M2
      Aspiration turbocharging and natural aspiration

      Load-transfer device

      Workload 1092 kg and 1588 kg

      Hydraulic system

      Overflow valve pressure 20684.3 kPa and 20684.3 kPa

      Carrier

      Caterpillar track length on ground level 1598 mm and 1645 mm
      Caterpillar track width 450 mm and 450 mm

      Images

      Sizes

      2. Width between caterpillar tracks 1860 mm 2. Width between caterpillar tracks 2098 mm
      3. Height to cab upper part 2320 mm 3. Height to cab upper part 2030 mm
      5. Clearance 345 mm 5. Clearance 229 mm
      7. Ground clearance at maximum lifting and unloading 2430 mm 7. Ground clearance at maximum lifting and unloading 2340 mm
      8. Radius at maximum lifting and unloading 985 mm 8. Radius at maximum lifting and unloading 860 mm
      1. Length with bucket 4038 mm 1. Length with bucket 3440 mm

      Carrier

      4. Caterpillar track length on ground level 1598 mm 4. Caterpillar track length on ground level 1645 mm