vs.

      Takeuchi TL250 vs. Mustang MTL20

      14 reasons to buy Takeuchi TL250:

      Sizes

      Clearance 345 mm and 325 mm 6 % more or 20 mm
      Ground clearance at maximum lifting and unloading 2430 mm and 2408 mm 1 % more or 22 mm
      Radius at maximum lifting and unloading 985 mm and 874 mm 11 % more or 111 mm

      Operation

      Fuel Capacity 108 l. and 90 l. 17 % more or 18 l.
      Cooling system fluid volume 16.5 l. and 15.1 l. 8 % more or 1.4 l.
      Engine oil volume 13.2 l. and 9.4 l. 29 % more or 3.8 l.
      Generator current strength 80 amperes and 50 amperes 37 % more or 30 amperes
      Maximum speed at low range 7.8 km/h and 7.2 km/h 8 % more or 0.6 km/h
      Maximum speed at high range 12 km/h and 10.3 km/h 14 % more or 1.7 km/h

      Motor

      Displacement 3.8 l. and 3.1 l. 18 % more or 0.7 l.
      Full power 73.1 kW and 60 kW 18 % more or 13.1 kW
      Power measured at 2600 rev / min and 2400 rev / min 8 % more or 200 rev
      Peak torque 325.4 Nm and 258 Nm 21 % more or 67.4 Nm

      Carrier

      Rolling bearings number on either side 6 and 4 33 % more or 2

      8 reasons to buy Mustang MTL20:

      Sizes

      Machine rear swing radius from center 1666 mm and 1755 mm 5 % less or 89 mm
      Turning radius with bucket from center 2294 mm and 2435 mm 6 % less or 141 mm

      Operation

      Hydraulic system fluid volume 83 l. and 65 l. 22 % more or 18 l.

      Motor

      Torque measured at 1800 rev / min and 1600 rev / min 11 % more or 200 rev

      Load-transfer device

      Tipping load 2700 kg and 3200 kg 16 % less or 500 kg

      Hydraulic system

      Pump flow rate 75 l/min and 88.7 l/min 15 % less or 13.7 l/min

      Carrier

      Caterpillar track width 457 mm and 450 mm 2 % more or 7 mm
      Specific ground pressure 28.3 kPa and 33.1 kPa 15 % less or 4.8 kPa

      Neutral reasons:

      Sizes

      Width between caterpillar tracks 1860 mm and 1770 mm
      Length with bucket 4038 mm and 3708 mm
      Height to cab upper part 2320 mm and 2167 mm

      Operation

      Working weight 5400 kg and 4350 kg
      Operating voltage 12 V and 12 V

      Motor

      Cylinders number 4 and 4
      Manufacturer Kubota and Isuzu
      Aspiration turbocharging and turbocharging
      Model V3800DI and 4JG1T

      Load-transfer device

      Workload 1092 kg and 1350 kg

      Hydraulic system

      Overflow valve pressure 20684.3 kPa and 20600 kPa

      Carrier

      Caterpillar track length on ground level 1598 mm and 1499 mm

      Images

      Sizes

      8. Radius at maximum lifting and unloading 985 mm 8. Radius at maximum lifting and unloading 874 mm
      1. Length with bucket 4038 mm 1. Length with bucket 3708 mm
      2. Width between caterpillar tracks 1860 mm 2. Width between caterpillar tracks 1770 mm
      3. Height to cab upper part 2320 mm 3. Height to cab upper part 2167 mm
      5. Clearance 345 mm 5. Clearance 325 mm
      7. Ground clearance at maximum lifting and unloading 2430 mm 7. Ground clearance at maximum lifting and unloading 2408 mm

      Carrier

      4. Caterpillar track length on ground level 1598 mm 4. Caterpillar track length on ground level 1499 mm