- Home/
- Comparison/
- Rough Terrain Truck/
- Terex PT100G vs. Case 440CT serie 3
Terex PT100G vs. Case 440CT serie 3
14 reasons to buy Terex PT100G:
Sizes
Clearance | 375 mm and 236 mm | 37 % more or 139 mm |
Operation
Fuel Capacity | 113.6 l. and 88.2 l. | 22 % more or 25.4 l. |
Cooling system fluid volume | 16.3 l. and 11.4 l. | 30 % more or 4.9 l. |
Hydraulic system fluid volume | 83.3 l. and 26.9 l. | 68 % more or 56.4 l. |
Generator current strength | 120 amperes and 95 amperes | 21 % more or 25 amperes |
Maximum speed at low range | 9.7 km/h and 8.2 km/h | 15 % more or 1.5 km/h |
Maximum speed at high range | 16.1 km/h and 12.9 km/h | 20 % more or 3.2 km/h |
Motor
Full power | 74.5 kW and 67.1 kW | 10 % more or 7.4 kW |
Peak torque | 420.3 Nm and 390.5 Nm | 7 % more or 29.8 Nm |
Hydraulic system
Pump flow rate | 75.7 l/min and 83 l/min | 9 % less or 7.3 l/min |
Carrier
Contact with ground area | 1.6 m2 and 1.1 m2 | 31 % more or 0.5 m2 |
Specific ground pressure | 31 kPa and 34.5 kPa | 10 % less or 3.5 kPa |
Rolling bearings number on either side | 24 and 3 | 87 % more or 21 |
Caterpillar track width | 457 mm and 400 mm | 12 % more or 57 mm |
5 reasons to buy Case 440CT serie 3:
Sizes
Ground clearance at maximum lifting and unloading | 2430 mm and 2311 mm | 5 % more or 119 mm |
Operation
Engine oil volume | 12 l. and 8.5 l. | 29 % more or 3.5 l. |
Motor
Power measured at | 2300 rev / min and 2200 rev / min | 4 % more or 100 rev |
Displacement | 4.5 l. and 4.4 l. | 2 % more or 0.1 l. |
Load-transfer device
Tipping load | 2721.6 kg and 3628.7 kg | 25 % less or 907.1 kg |
Neutral reasons:
Sizes
Width between caterpillar tracks | 1778 mm and 1812 mm |
Length with bucket | 3785 mm and 3290 mm |
Length without bucket | 2985 mm and 2600 mm |
Height to cab upper part | 2172 mm and 2050 mm |
Operation
Working weight | 5199.1 kg and 4048.3 kg |
Operating voltage | 12 V and 12 V |
Motor
Aspiration | turbocharging and turbocharging |
Manufacturer | Perkins and Case |
Model | 1104D-44T and 445T/M3 |
Cylinders number | 4 and 4 |
Load-transfer device
Workload | 1814.4 kg and 1360.8 kg |
Carrier
Caterpillar track length on ground level | 1803 mm and 1438 mm |
Images
Sizes
1. Length with bucket | 3785 mm | 1. Length with bucket | 3290 mm |
2. Width between caterpillar tracks | 1778 mm | 2. Width between caterpillar tracks | 1812 mm |
3. Height to cab upper part | 2172 mm | 3. Height to cab upper part | 2050 mm |
5. Clearance | 375 mm | 5. Clearance | 236 mm |
6. Length without bucket | 2985 mm | 6. Length without bucket | 2600 mm |
7. Ground clearance at maximum lifting and unloading | 2311 mm | 7. Ground clearance at maximum lifting and unloading | 2430 mm |
Carrier
4. Caterpillar track length on ground level | 1803 mm | 4. Caterpillar track length on ground level | 1438 mm |