Terex PT100G vs. Komatsu CK35-1

9 reasons to buy Terex PT100G:

Cooling system fluid volume	16.3 l. and 8 l.	51 % more or 8.3 l.
Fuel Capacity	113.6 l. and 64 l.	44 % more or 49.6 l.
Hydraulic system fluid volume	83.3 l. and 38 l.	54 % more or 45.3 l.
Generator current strength	120 amperes and 40 amperes	67 % more or 80 amperes
Maximum speed at low range	9.7 km/h and 7.3 km/h	25 % more or 2.4 km/h
Maximum speed at high range	16.1 km/h and 12 km/h	25 % more or 4.1 km/h

Peak torque	420.3 Nm and 286 Nm	32 % more or 134.3 Nm
Displacement	4.4 l. and 3.4 l.	23 % more or 1.0 l.

Pump flow rate

75.7 l/min and 80 l/min

5 % less or 4.3 l/min

Ground clearance at maximum lifting and unloading

3575 mm and 2311 mm

35 % more or 1264 mm

Engine oil volume

12.5 l. and 8.5 l.

32 % more or 4.0 l.

Power measured at

2500 rev / min and 2200 rev / min

12 % more or 300 rev

Tipping load

3570 kg and 3628.7 kg

2 % less or 58.7 kg

Length with bucket	3785 mm and 3550 mm
Height to cab upper part	2172 mm and 2130 mm
Width between caterpillar tracks	1778 mm and 2030 mm

Working weight	5199.1 kg and 4330 kg
Operating voltage	12 V and 12 V

Manufacturer	Perkins and Komatsu
Model	1104D-44T and S4D98E-2NFE
Cylinders number	4 and 4
Aspiration	turbocharging and turbocharging

Workload

1814.4 kg and 1250 kg

Overflow valve pressure

22752.7 kPa and 20994.5 kPa

1. Length with bucket	3785 mm	1. Length with bucket	3550 mm
2. Width between caterpillar tracks	1778 mm	2. Width between caterpillar tracks	2030 mm
3. Height to cab upper part	2172 mm	3. Height to cab upper part	2130 mm
7. Ground clearance at maximum lifting and unloading	2311 mm	7. Ground clearance at maximum lifting and unloading	3575 mm