vs.

      Volvo MCT135C vs. Takeuchi TL120

      15 reasons to buy Volvo MCT135C:

      Sizes

      Clearance 248 mm and 20.7 mm 92 % more or 227.3 mm
      Radius at maximum lifting and unloading 900 mm and 586.7 mm 35 % more or 313.3 mm
      Turning radius with bucket from center 1760 mm and 2057.4 mm 14 % less or 297.4 mm

      Operation

      Engine oil volume 15 l. and 7.4 l. 51 % more or 7.6 l.
      Hydraulic system fluid volume 60 l. and 29.2 l. 51 % more or 30.8 l.
      Generator current strength 95 amperes and 40 amperes 58 % more or 55 amperes
      Maximum speed at low range 9.2 km/h and 6.4 km/h 30 % more or 2.8 km/h
      Maximum speed at high range 12.6 km/h and 9.3 km/h 26 % more or 3.3 km/h
      Fuel Capacity 103 l. and 57.9 l. 44 % more or 45.1 l.
      Cooling system fluid volume 15.5 l. and 11 l. 29 % more or 4.5 l.

      Motor

      Full power 68.6 kW and 38.8 kW 43 % more or 29.8 kW
      Peak torque 408.1 Nm and 166.8 Nm 59 % more or 241.3 Nm
      Torque measured at 1800 rev / min and 1680 rev / min 7 % more or 120 rev
      Displacement 4.4 l. and 2 l. 55 % more or 2.4 l.

      Carrier

      Caterpillar track width 450 mm and 296.4 mm 34 % more or 153.6 mm

      5 reasons to buy Takeuchi TL120:

      Sizes

      Ground clearance at maximum lifting and unloading 2905.7 mm and 2390 mm 18 % more or 515.7 mm
      Machine rear swing radius from center 1501.1 mm and 1760 mm 15 % less or 258.9 mm

      Motor

      Power measured at 2800 rev / min and 2200 rev / min 21 % more or 600 rev

      Load-transfer device

      Tipping load 1609.8 kg and 3913.6 kg 59 % less or 2303.8 kg

      Hydraulic system

      Pump flow rate 57.2 l/min and 87 l/min 34 % less or 29.8 l/min

      Neutral reasons:

      Sizes

      Height to cab upper part 2080 mm and 1971.1 mm
      Width between caterpillar tracks 1980 mm and 1470.7 mm
      Length with bucket 3780 mm and 3220.7 mm

      Operation

      Operating voltage 12 V and 12 V
      Working weight 4836.7 kg and 2699.8 kg

      Motor

      Manufacturer JCB and Yanmar
      Model TC63 and 4TNV84T
      Cylinders number 4 and 4

      Load-transfer device

      Workload 1360.8 kg and 565.2 kg

      Hydraulic system

      Overflow valve pressure 22994 kPa and 20684.3 kPa

      Images

      Sizes

      1. Length with bucket 3780 mm 1. Length with bucket 3220.7 mm
      2. Width between caterpillar tracks 1980 mm 2. Width between caterpillar tracks 1470.7 mm
      3. Height to cab upper part 2080 mm 3. Height to cab upper part 1971.1 mm
      5. Clearance 248 mm 5. Clearance 20.7 mm
      7. Ground clearance at maximum lifting and unloading 2390 mm 7. Ground clearance at maximum lifting and unloading 2905.7 mm
      8. Radius at maximum lifting and unloading 900 mm 8. Radius at maximum lifting and unloading 586.7 mm