vs.

      Euclid R60 vs. Caterpillar 775D

      11 reasons to buy Euclid R60:

      Weight

      Unloaded front weight distribution 49 % and 47.3 % 3 % more or 1.7 %
      Loaded rear weight distribution 68 % and 66.7 % 2 % more or 1.3 %

      Sizes

      Clearance 762 mm and 600 mm 21 % more or 162 mm
      Unloading ground clearance 762 mm and 660 mm 13 % more or 102 mm

      Operation

      Fuel Capacity 700.2 l. and 700 l. 0 % more or 0.2 l.
      Generator current strength 75 amperes and 50 amperes 33 % more or 25 amperes
      Cooling system fluid volume 189.3 l. and 151 l. 20 % more or 38.3 l.
      Steering system fluid volume 98.4 l. and 60 l. 39 % more or 38.4 l.

      Motor

      Power measured at 2100 rev / min and 2000 rev / min 5 % more or 100 rev
      Torque measured at 1400 rev / min and 1200 rev / min 14 % more or 200 rev

      Gear box

      Reverse gears number 2 and 1 50 % more or 1

      15 reasons to buy Caterpillar 775D:

      Weight

      Unloaded rear weight distribution 52.7 % and 51 % 3 % more or 1.7 %
      Loaded front weight distribution 33.3 % and 32 % 4 % more or 1.3 %

      Operation

      Brake / lift system fluid volume 307 l. and 174.1 l. 43 % more or 132.9 l.
      Engine oil volume 68 l. and 60.6 l. 11 % more or 7.4 l.

      Motor

      Maximum torque 2757.7 Nm and 2730 Nm 1 % more or 27.7 Nm
      Cylinders number 12 and 6 50 % more or 6
      Full power 540.6 kW and 522 kW 3 % more or 18.6 kW
      Effective power 516.8 kW and 498 kW 4 % more or 18.8 kW
      Displacement 27 l. and 18.8 l. 30 % more or 8.2 l.

      Gear box

      Forward gears number 7 and 6 14 % more or 1
      Maximum speed 65.8 km/h and 57.6 km/h 12 % more or 8.2 km/h

      Dump

      Brimmed lifting capacity 31.4 m3 and 25 m3 20 % more or 6.4 m3
      Lifting capacity with top 41.5 m3 and 36 m3 13 % more or 5.5 m3
      Lifting time 9.5 sec and 10 sec 5 % less or 0.5 sec
      Lowering time 12.5 sec and 14 sec 11 % less or 1.5 sec

      Neutral reasons:

      Weight

      Weight without load 38718 kg and 43227.4 kg
      Laden weight 96000 kg and 106594.2 kg

      Sizes

      Unloading height 8915.4 mm and 8800 mm
      Dimensional length 9296.4 mm and 9700 mm
      Overall width 4444 mm and 3970 mm
      Headroom 4242.8 mm and 4410 mm
      Wheelbase 4291.6 mm and 4190 mm

      Operation

      Operating voltage 24 V and 24 V
      Tyre size 24.00-35(36)E3 and 24.00-R35

      Motor

      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and Turbocharging with subsequent air cooling (by a cooling radiator)
      Manufacturer Cummins and Caterpillar
      Model KTTA19-C and 3412ETA

      Gear box

      Transmission type Allison CLT-6063 and powershift

      Dump

      Discharge angle 60 degrees and 60 degrees
      Nominal payload 57283 kg and 63366.9 kg

      Images

      Sizes

      7. Unloading ground clearance 762 mm 7. Unloading ground clearance 660 mm
      1. Dimensional length 9296.4 mm 1. Dimensional length 9700 mm
      2. Overall width 4444 mm 2. Overall width 3970 mm
      3. Headroom 4242.8 mm 3. Headroom 4410 mm
      4. Wheelbase 4291.6 mm 4. Wheelbase 4190 mm
      5. Clearance 762 mm 5. Clearance 600 mm
      6. Unloading height 8915.4 mm 6. Unloading height 8800 mm

      Dump

      8. Discharge angle 60 degrees 8. Discharge angle 60 degrees