- Home/
- Comparison/
- Mining Dump Truck/
- Hitachi EH700-2 vs. Caterpillar 775D
Hitachi EH700-2 vs. Caterpillar 775D
8 reasons to buy Hitachi EH700-2:
Weight
Unloaded front weight distribution | 49 % and 47.3 % | 3 % more or 1.7 % |
Loaded rear weight distribution | 67 % and 66.7 % | 0 % more or 0.3 % |
Operation
Cooling system fluid volume | 159 l. and 151 l. | 5 % more or 8 l. |
Steering system fluid volume | 97 l. and 60 l. | 38 % more or 37 l. |
Generator current strength | 75 amperes and 50 amperes | 33 % more or 25 amperes |
Motor
Power measured at | 2100 rev / min and 2000 rev / min | 5 % more or 100 rev |
Gear box
Reverse gears number | 2 and 1 | 50 % more or 1 |
Maximum speed | 76 km/h and 65.8 km/h | 13 % more or 10.2 km/h |
17 reasons to buy Caterpillar 775D:
Weight
Unloaded rear weight distribution | 52.7 % and 51 % | 3 % more or 1.7 % |
Loaded front weight distribution | 33.3 % and 33 % | 1 % more or 0.3 % |
Sizes
Unloading ground clearance | 660 mm and 480 mm | 27 % more or 180 mm |
Clearance | 600 mm and 510 mm | 15 % more or 90 mm |
Operation
Fuel Capacity | 700 l. and 454 l. | 35 % more or 246 l. |
Engine oil volume | 68 l. and 61 l. | 10 % more or 7 l. |
Differential/final drive fluid volume | 155 l. and 50.3 l. | 68 % more or 104.7 l. |
Brake / lift system fluid volume | 307 l. and 178 l. | 42 % more or 129 l. |
Motor
Cylinders number | 12 and 6 | 50 % more or 6 |
Effective power | 516.8 kW and 357.9 kW | 31 % more or 158.9 kW |
Displacement | 27 l. and 15 l. | 44 % more or 12 l. |
Full power | 540.6 kW and 391.5 kW | 28 % more or 149.1 kW |
Gear box
Forward gears number | 7 and 6 | 14 % more or 1 |
Dump
Brimmed lifting capacity | 31.4 m3 and 17 m3 | 46 % more or 14.4 m3 |
Lifting capacity with top | 41.5 m3 and 24 m3 | 42 % more or 17.5 m3 |
Lifting time | 9.5 sec and 13.9 sec | 32 % less or 4.4 sec |
Lowering time | 12.5 sec and 14 sec | 11 % less or 1.5 sec |
Neutral reasons:
Weight
Laden weight | 69900 kg and 106594.2 kg |
Weight without load | 31900 kg and 43227.4 kg |
Sizes
Dimensional length | 8660 mm and 9700 mm |
Overall width | 4760 mm and 3970 mm |
Headroom | 4320 mm and 4410 mm |
Wheelbase | 3780 mm and 4190 mm |
Unloading height | 8130 mm and 8800 mm |
Operation
Operating voltage | 24 V and 24 V |
Tyre size | 18R33(**)E4 Radial and 24.00-R35 |
Motor
Aspiration | Turbocharging with subsequent air cooling (by a cooling radiator) and Turbocharging with subsequent air cooling (by a cooling radiator) |
Manufacturer | Cummins and Caterpillar |
Model | QSX15-525 and 3412ETA |
Gear box
Transmission type | Allison M5610A planetary, fully automatic powershift and powershift |
Dump
Discharge angle | 60 degrees and 60 degrees |
Images
Sizes
7. Unloading ground clearance | 480 mm | 7. Unloading ground clearance | 660 mm |
1. Dimensional length | 8660 mm | 1. Dimensional length | 9700 mm |
2. Overall width | 4760 mm | 2. Overall width | 3970 mm |
3. Headroom | 4320 mm | 3. Headroom | 4410 mm |
4. Wheelbase | 3780 mm | 4. Wheelbase | 4190 mm |
5. Clearance | 510 mm | 5. Clearance | 600 mm |
6. Unloading height | 8130 mm | 6. Unloading height | 8800 mm |
Dump
8. Discharge angle | 60 degrees | 8. Discharge angle | 60 degrees |