- Home/
- Comparison/
- Mining Dump Truck/
- Hitachi EH700-2 vs. Caterpillar 793D
Hitachi EH700-2 vs. Caterpillar 793D
6 reasons to buy Hitachi EH700-2:
Weight
| Unloaded front weight distribution | 49 % and 46 % | 6 % more or 3 % |
Motor
| Power measured at | 2100 rev / min and 1750 rev / min | 17 % more or 350 rev |
Gear box
| Reverse gears number | 2 and 1 | 50 % more or 1 |
| Maximum speed | 76 km/h and 54.3 km/h | 29 % more or 21.7 km/h |
Dump
| Lifting time | 13.9 sec and 20.3 sec | 32 % less or 6.4 sec |
| Lowering time | 14 sec and 19.3 sec | 27 % less or 5.3 sec |
15 reasons to buy Caterpillar 793D:
Weight
| Unloaded rear weight distribution | 54 % and 51 % | 6 % more or 3 % |
Sizes
| Clearance | 1005 mm and 510 mm | 49 % more or 495 mm |
| Unloading ground clearance | 1364 mm and 480 mm | 65 % more or 884 mm |
Operation
| Brake / lift system fluid volume | 1375 l. and 178 l. | 87 % more or 1197 l. |
| Fuel Capacity | 4354 l. and 454 l. | 90 % more or 3900 l. |
| Cooling system fluid volume | 973 l. and 159 l. | 84 % more or 814 l. |
| Engine oil volume | 265 l. and 61 l. | 77 % more or 204 l. |
| Differential/final drive fluid volume | 265 l. and 50.3 l. | 81 % more or 214.7 l. |
| Steering system fluid volume | 341 l. and 97 l. | 72 % more or 244 l. |
Motor
| Full power | 1801 kW and 391.5 kW | 78 % more or 1409.5 kW |
| Effective power | 1743 kW and 357.9 kW | 79 % more or 1385.1 kW |
| Displacement | 78 l. and 15 l. | 81 % more or 63 l. |
| Cylinders number | 16 and 6 | 62 % more or 10 |
Dump
| Brimmed lifting capacity | 96 m3 and 17 m3 | 82 % more or 79 m3 |
| Lifting capacity with top | 129 m3 and 24 m3 | 81 % more or 105 m3 |
Neutral reasons:
Weight
| Weight without load | 31900 kg and 159662 kg |
| Laden weight | 69900 kg and 383749 kg |
| Loaded front weight distribution | 33 % and 33 % |
| Loaded rear weight distribution | 67 % and 67 % |
Sizes
| Dimensional length | 8660 mm and 12862 mm |
| Overall width | 4760 mm and 7680 mm |
| Headroom | 4320 mm and 6494 mm |
| Wheelbase | 3780 mm and 5905 mm |
| Unloading height | 8130 mm and 13113 mm |
Operation
| Generator current strength | 75 amperes and 75 amperes |
| Tyre size | 18R33(**)E4 Radial and 40.00-R57(E4) |
| Operating voltage | 24 V and 24 V |
Motor
| Manufacturer | Cummins and Caterpillar |
| Model | QSX15-525 and 3516B HD EUI |
| Aspiration | Turbocharging with subsequent air cooling (by a cooling radiator) and turbocharging |
Gear box
| Transmission type | Allison M5610A planetary, fully automatic powershift and 6-speed planetary powershift |
| Forward gears number | 6 and 6 |
Dump
| Discharge angle | 60 degrees and 45 degrees |
Images
Sizes
| 1. Dimensional length | 8660 mm | 1. Dimensional length | 12862 mm |
| 2. Overall width | 4760 mm | 2. Overall width | 7680 mm |
| 3. Headroom | 4320 mm | 3. Headroom | 6494 mm |
| 4. Wheelbase | 3780 mm | 4. Wheelbase | 5905 mm |
| 5. Clearance | 510 mm | 5. Clearance | 1005 mm |
| 6. Unloading height | 8130 mm | 6. Unloading height | 13113 mm |
| 7. Unloading ground clearance | 480 mm | 7. Unloading ground clearance | 1364 mm |
Dump
| 8. Discharge angle | 60 degrees | 8. Discharge angle | 45 degrees |