vs.

      Hitachi EH700-2 vs. Komatsu HD680

      3 reasons to buy Hitachi EH700-2:

      Weight

      Loaded front weight distribution 33 % and 32 % 3 % more or 1 %

      Gear box

      Maximum speed 76 km/h and 65 km/h 14 % more or 11 km/h
      Reverse gears number 2 and 1 50 % more or 1

      7 reasons to buy Komatsu HD680:

      Weight

      Loaded rear weight distribution 68 % and 67 % 1 % more or 1 %

      Sizes

      Unloading ground clearance 540 mm and 480 mm 11 % more or 60 mm
      Clearance 565 mm and 510 mm 10 % more or 55 mm

      Motor

      Displacement 28 l. and 15 l. 46 % more or 13 l.
      Full power 577.9 kW and 391.5 kW 32 % more or 186.4 kW

      Dump

      Brimmed lifting capacity 32 m3 and 17 m3 47 % more or 15 m3
      Lifting capacity with top 44 m3 and 24 m3 45 % more or 20 m3

      Neutral reasons:

      Weight

      Weight without load 31900 kg and 46500 kg
      Laden weight 69900 kg and 114555 kg

      Sizes

      Unloading height 8130 mm and 8720 mm
      Dimensional length 8660 mm and 9790 mm
      Overall width 4760 mm and 4675 mm
      Headroom 4320 mm and 4290 mm
      Wheelbase 3780 mm and 4750 mm

      Operation

      Tyre size 18R33(**)E4 Radial and 24.00-35-42PR

      Motor

      Manufacturer Cummins and Cummins
      Model QSX15-525 and HD680

      Gear box

      Transmission type Allison M5610A planetary, fully automatic powershift and hydraulic gear reducer and TORQFLOW
      Forward gears number 6 and 6

      Dump

      Discharge angle 60 degrees and 65 degrees

      Images

      Sizes

      1. Dimensional length 8660 mm 1. Dimensional length 9790 mm
      2. Overall width 4760 mm 2. Overall width 4675 mm
      3. Headroom 4320 mm 3. Headroom 4290 mm
      4. Wheelbase 3780 mm 4. Wheelbase 4750 mm
      5. Clearance 510 mm 5. Clearance 565 mm
      6. Unloading height 8130 mm 6. Unloading height 8720 mm
      7. Unloading ground clearance 480 mm 7. Unloading ground clearance 540 mm

      Dump

      8. Discharge angle 60 degrees 8. Discharge angle 65 degrees