- Home/
- Comparison/
- Mining Dump Truck/
- Komatsu 930E-4SE vs. Terex MT3700AC
Komatsu 930E-4SE vs. Terex MT3700AC
10 reasons to buy Komatsu 930E-4SE:
Weight
Unloaded front weight distribution | 48.5 % and 46.4 % | 4 % more or 2.1 % |
Loaded front weight distribution | 32.8 % and 32.4 % | 1 % more or 0.4 % |
Operation
Fuel Capacity | 5300 l. and 2877 l. | 46 % more or 2423 l. |
Cooling system fluid volume | 719 l. and 492 l. | 32 % more or 227 l. |
Hydraulic system fluid volume | 1325 l. and 889 l. | 33 % more or 436 l. |
Motor
Effective power | 2558 kW and 1398.2 kW | 45 % more or 1159.8 kW |
Full power | 2611 kW and 1510 kW | 42 % more or 1101 kW |
Dump
Brimmed lifting capacity | 171 m3 and 92 m3 | 46 % more or 79 m3 |
Lifting capacity with top | 211 m3 and 123 m3 | 42 % more or 88 m3 |
Lifting time | 21 sec and 22 sec | 5 % less or 1 sec |
5 reasons to buy Terex MT3700AC:
Weight
Loaded rear weight distribution | 67.6 % and 67.2 % | 1 % more or 0.4 % |
Unloaded rear weight distribution | 53.6 % and 51.5 % | 4 % more or 2.1 % |
Sizes
Unloading ground clearance | 1600 mm and 1550 mm | 3 % more or 50 mm |
Gear box
Maximum speed | 65 km/h and 64.5 km/h | 1 % more or 0.5 km/h |
Dump
Lowering time | 14 sec and 23 sec | 39 % less or 9 sec |
Neutral reasons:
Weight
Weight without load | 30362 kg and 149685.5 kg |
Sizes
Dimensional length | 15600 mm and 13100 mm |
Overall width | 8690 mm and 7300 mm |
Headroom | 7370 mm and 6900 mm |
Wheelbase | 6350 mm and 5600 mm |
Unloading height | 14020 mm and 12000 mm |
Motor
Manufacturer | Komatsu and MTU/DDC |
Model | SSDA18V170 and 12V4000 |
Dump
Nominal payload | 291659.9 kg and 185972.9 kg |
Images
Sizes
7. Unloading ground clearance | 1550 mm | 7. Unloading ground clearance | 1600 mm |
1. Dimensional length | 15600 mm | 1. Dimensional length | 13100 mm |
2. Overall width | 8690 mm | 2. Overall width | 7300 mm |
3. Headroom | 7370 mm | 3. Headroom | 6900 mm |
4. Wheelbase | 6350 mm | 4. Wheelbase | 5600 mm |
6. Unloading height | 14020 mm | 6. Unloading height | 12000 mm |