- Home/
- Comparison/
- Mining Dump Truck/
- Komatsu HD465-2 vs. Terex MT3700B
Komatsu HD465-2 vs. Terex MT3700B
3 reasons to buy Komatsu HD465-2:
Weight
| Unloaded front weight distribution | 48 % and 47.3 % | 1 % more or 0.7 % |
| Loaded rear weight distribution | 68 % and 67.3 % | 1 % more or 0.7 % |
Gear box
| Maximum speed | 65 km/h and 55 km/h | 15 % more or 10 km/h |
9 reasons to buy Terex MT3700B:
Weight
| Unloaded rear weight distribution | 52.7 % and 52 % | 1 % more or 0.7 % |
| Loaded front weight distribution | 32.7 % and 32 % | 2 % more or 0.7 % |
Sizes
| Unloading ground clearance | 1600 mm and 670 mm | 58 % more or 930 mm |
Operation
| Engine oil volume | 151 l. and 90 l. | 40 % more or 61 l. |
| Hydraulic system fluid volume | 833 l. and 120 l. | 86 % more or 713 l. |
| Fuel Capacity | 2877 l. and 780 l. | 73 % more or 2097 l. |
| Cooling system fluid volume | 348 l. and 217 l. | 38 % more or 131 l. |
Motor
| Full power | 1286.3 kW and 506.3 kW | 61 % more or 780.0 kW |
Dump
| Lifting capacity with top | 111 m3 and 34.2 m3 | 69 % more or 76.8 m3 |
Neutral reasons:
Weight
| Weight without load | 36500 kg and 130608.3 kg |
| Laden weight | 82555 kg and 302973.4 kg |
Sizes
| Dimensional length | 9000 mm and 13100 mm |
| Overall width | 4050 mm and 7300 mm |
| Headroom | 4250 mm and 6900 mm |
| Wheelbase | 4250 mm and 5600 mm |
| Unloading height | 8500 mm and 11900 mm |
Operation
| Tyre size | 21.00-35-32PR and 37.00R57 |
Motor
| Manufacturer | Cummins and Detroit diesel |
| Model | VTA-1710-C and 12V 4000 |
Dump
| Discharge angle | 50 degrees and 45 degrees |
| Nominal payload | 49895.2 kg and 185972.9 kg |
Images
Sizes
| 1. Dimensional length | 9000 mm | 1. Dimensional length | 13100 mm |
| 2. Overall width | 4050 mm | 2. Overall width | 7300 mm |
| 3. Headroom | 4250 mm | 3. Headroom | 6900 mm |
| 4. Wheelbase | 4250 mm | 4. Wheelbase | 5600 mm |
| 6. Unloading height | 8500 mm | 6. Unloading height | 11900 mm |
| 7. Unloading ground clearance | 670 mm | 7. Unloading ground clearance | 1600 mm |
Dump
| 8. Discharge angle | 50 degrees | 8. Discharge angle | 45 degrees |