- Home/
- Comparison/
- Mining Dump Truck/
- Komatsu HD785-7 vs. Terex TR60
Komatsu HD785-7 vs. Terex TR60
17 reasons to buy Komatsu HD785-7:
Weight
Unloaded rear weight distribution | 53 % and 52 % | 2 % more or 1 % |
Loaded rear weight distribution | 68.5 % and 66 % | 4 % more or 2.5 % |
Sizes
Unloading ground clearance | 985 mm and 600 mm | 39 % more or 385 mm |
Operation
Generator current strength | 90 amperes and 70 amperes | 22 % more or 20 amperes |
Fuel Capacity | 1308 l. and 606 l. | 54 % more or 702 l. |
Engine oil volume | 129 l. and 66 l. | 49 % more or 63 l. |
Differential/final drive fluid volume | 137 l. and 52 l. | 62 % more or 85 l. |
Motor
Full power | 894.8 kW and 484.7 kW | 46 % more or 410.1 kW |
Effective power | 878.4 kW and 481 kW | 45 % more or 397.4 kW |
Displacement | 30.5 l. and 18.8 l. | 38 % more or 11.7 l. |
Maximum torque | 5080.3 Nm and 3084.5 Nm | 39 % more or 1995.8 Nm |
Cylinders number | 12 and 6 | 50 % more or 6 |
Gear box
Forward gears number | 7 and 6 | 14 % more or 1 |
Maximum speed | 65 km/h and 57.5 km/h | 12 % more or 7.5 km/h |
Dump
Lifting time | 13 sec and 16 sec | 19 % less or 3 sec |
Brimmed lifting capacity | 40 m3 and 26 m3 | 35 % more or 14 m3 |
Lifting capacity with top | 60 m3 and 35 m3 | 42 % more or 25 m3 |
5 reasons to buy Terex TR60:
Weight
Unloaded front weight distribution | 48 % and 47 % | 2 % more or 1 % |
Loaded front weight distribution | 34 % and 31.5 % | 7 % more or 2.5 % |
Operation
Hydraulic system fluid volume | 258 l. and 175 l. | 32 % more or 83 l. |
Motor
Power measured at | 2100 rev / min and 1900 rev / min | 10 % more or 200 rev |
Dump
Lowering time | 4 sec and 14 sec | 71 % less or 10 sec |
Neutral reasons:
Weight
Weight without load | 72000 kg and 41249.7 kg |
Laden weight | 366000 kg and 95680.8 kg |
Sizes
Dimensional length | 10290 mm and 9100 mm |
Overall width | 5530 mm and 5000 mm |
Headroom | 5050 mm and 4400 mm |
Wheelbase | 4950 mm and 4100 mm |
Unloading height | 10080 mm and 8000 mm |
Operation
Tyre size | 27.00R49 and 24.00-35 layers of diagonal cord |
Operating voltage | 24 V and 24 V |
Motor
Manufacturer | Komatsu and Cummins |
Model | SAA12V140E-3 and QSK19-C650 |
Aspiration | turbocharging and turbocharging |
Gear box
Transmission type | planetary gear and Allison M6610AR |
Reverse gears number | 2 and 2 |
Dump
Discharge angle | 48 degrees and 58 degrees |
Nominal payload | 91000 kg and 54431.1 kg |
Images
Sizes
6. Unloading height | 10080 mm | 6. Unloading height | 8000 mm |
7. Unloading ground clearance | 985 mm | 7. Unloading ground clearance | 600 mm |
1. Dimensional length | 10290 mm | 1. Dimensional length | 9100 mm |
2. Overall width | 5530 mm | 2. Overall width | 5000 mm |
3. Headroom | 5050 mm | 3. Headroom | 4400 mm |
4. Wheelbase | 4950 mm | 4. Wheelbase | 4100 mm |
Dump
8. Discharge angle | 48 degrees | 8. Discharge angle | 58 degrees |