- Home/
- Comparison/
- Mining Excavator/
- Hitachi EX5500-5 vs. Terex RH170
Hitachi EX5500-5 vs. Terex RH170
18 reasons to buy Hitachi EX5500-5:
Sizes
| Caterpillar track length | 9350 mm and 8070 mm | 14 % more or 1280 mm |
| Clearance | 1100 mm and 980 mm | 11 % more or 120 mm |
| Upper structure clearance | 3000 mm and 2560 mm | 15 % more or 440 mm |
Shovel boom/sections 1
| Maximum excavation depth | 9000 mm and 7000 mm | 22 % more or 2000 mm |
Shovel
| Bucket initial volume | 27 m3 and 21 m3 | 22 % more or 6 m3 |
| Maximum bucket volume | 30.6 m3 and 21 m3 | 31 % more or 9.6 m3 |
Operation
| Fuel Capacity | 10400 l. and 6300 l. | 39 % more or 4100 l. |
| Hydraulic system fluid volume | 6200 l. and 3000 l. | 52 % more or 3200 l. |
Motor
| Effective power | 1941.8 kW and 1491.4 kW | 23 % more or 450.4 kW |
| Power measured at | 1800 rev / min and 1750 rev / min | 3 % more or 50 rev |
| Displacement | 90 l. and 37.8 l. | 58 % more or 52.2 l. |
| Full power | 2013.4 kW and 1789.7 kW | 11 % more or 223.7 kW |
Loading bucket
| Maximum excavation depth | 4550 mm and 2500 mm | 45 % more or 2050 mm |
| Maximum unloading height | 13100 mm and 10800 mm | 18 % more or 2300 mm |
| Maximum digging radius | 16600 mm and 15300 mm | 8 % more or 1300 mm |
Carrier
| Unloaded backhoe shovel operational weight with support 1 | 518000 kg and 394400 kg | 24 % more or 123600 kg |
| Excavator specific ground pressure with support 1 | 230 kPa and 235.1 kPa | 2 % less or 5.1 kPa |
| Upper rollers number | 3 and 2 | 33 % more or 1 |
6 reasons to buy Terex RH170:
Shovel
| Bucket minimum volume | 18 m3 and 27 m3 | 33 % less or 9 m3 |
Operation
| Generator current strength | 350 amperes and 150 amperes | 57 % more or 200 amperes |
| Rotation speed | 4.7 rev / min and 3.3 rev / min | 30 % more or 1.4 rev |
Motor
| Cylinders number | 24 and 12 | 50 % more or 12 |
Carrier
| Maximum travel speed | 2.6 km/h and 2.3 km/h | 12 % more or 0.3 km/h |
| Track shoes number on either side | 42 and 39 | 7 % more or 3 |
Neutral reasons:
Sizes
| Caterpillar track length on ground level | 7000 mm and 6200 mm |
| Caterpillar track height | 2730 mm and 2200 mm |
| Width between caterpillar tracks | 7400 mm and 6600 mm |
| Height to cab upper part | 8500 mm and 8150 mm |
Shovel boom/sections 1
| Backhoe shovel boom / section | Boom 10600mm/Section 5300mm and Boom 31'2" (9500mm)/Section 14'9" (4500mm) |
| Maximum cut height | 20600 mm and 17000 mm |
Operation
| Operating voltage | 24 V and 24 V |
Motor
| Aspiration | turbocharging and Turbocharging with charge air cooler |
| Manufacturer | Cummins and Cummins |
| Model | QSK45-C and 2x KTA 38 C-1200 |
Loading bucket
| Maximum cut height | 18900 mm and 14200 mm |
Carrier
| Track width | 6000 mm and 5400 mm |
| Backhoe shovel support width 1 | 1400 mm and 1200 mm |
| Lower rollers number | 7 and 7 |
| Rear platform swing radius | 7750 mm and 6780 mm |
Images
Sizes
| 2. Width between caterpillar tracks | 7400 mm | 2. Width between caterpillar tracks | 6600 mm |
| 4. Caterpillar track length on ground level | 7000 mm | 4. Caterpillar track length on ground level | 6200 mm |
| 5. Clearance | 1100 mm | 5. Clearance | 980 mm |
| 7. Height to cab upper part | 8500 mm | 7. Height to cab upper part | 8150 mm |
Loading bucket
| 19. Maximum digging radius | 16600 mm | 19. Maximum digging radius | 15300 mm |
| 20. Maximum excavation depth | 4550 mm | 20. Maximum excavation depth | 2500 mm |
| 17. Maximum cut height | 18900 mm | 17. Maximum cut height | 14200 mm |
| 18. Maximum unloading height | 13100 mm | 18. Maximum unloading height | 10800 mm |
Carrier
| 6. Track width | 6000 mm | 6. Track width | 5400 mm |