- Home/
- Comparison/
- Mining Excavator/
- Terex RH170 vs. Hitachi EX3600-6
Terex RH170 vs. Hitachi EX3600-6
12 reasons to buy Terex RH170:
Sizes
| Upper structure clearance | 2560 mm and 2440 mm | 5 % more or 120 mm |
| Clearance | 980 mm and 905 mm | 8 % more or 75 mm |
Shovel
| Bucket minimum volume | 18 m3 and 21 m3 | 14 % less or 3 m3 |
Operation
| Rotation speed | 4.7 rev / min and 3.2 rev / min | 32 % more or 1.5 rev |
| Generator current strength | 350 amperes and 140 amperes | 60 % more or 210 amperes |
Motor
| Full power | 1789.7 kW and 1449.6 kW | 19 % more or 340.1 kW |
| Effective power | 1491.4 kW and 1449.6 kW | 3 % more or 41.8 kW |
| Cylinders number | 24 and 16 | 33 % more or 8 |
Loading bucket
| Maximum digging radius | 15300 mm and 3910 mm | 74 % more or 11390 mm |
Carrier
| Track shoes number on either side | 42 and 38 | 10 % more or 4 |
| Unloaded backhoe shovel operational weight with support 1 | 394400 kg and 359000 kg | 9 % more or 35400 kg |
| Maximum travel speed | 2.6 km/h and 2.2 km/h | 15 % more or 0.4 km/h |
12 reasons to buy Hitachi EX3600-6:
Sizes
| Caterpillar track length | 8700 mm and 8070 mm | 7 % more or 630 mm |
Shovel boom/sections 1
| Maximum excavation depth | 8580 mm and 7000 mm | 18 % more or 1580 mm |
Shovel
| Maximum bucket volume | 23 m3 and 21 m3 | 9 % more or 2 m3 |
Operation
| Fuel Capacity | 7450 l. and 6300 l. | 15 % more or 1150 l. |
| Hydraulic system fluid volume | 4000 l. and 3000 l. | 25 % more or 1000 l. |
Motor
| Power measured at | 1800 rev / min and 1750 rev / min | 3 % more or 50 rev |
| Displacement | 60 l. and 37.8 l. | 37 % more or 22.2 l. |
Loading bucket
| Maximum excavation depth | 3910 mm and 2500 mm | 36 % more or 1410 mm |
| Maximum unloading height | 10990 mm and 10800 mm | 2 % more or 190 mm |
Carrier
| Lower rollers number | 8 and 7 | 12 % more or 1 |
| Excavator specific ground pressure with support 1 | 188 kPa and 235.1 kPa | 20 % less or 47.1 kPa |
| Upper rollers number | 3 and 2 | 33 % more or 1 |
Neutral reasons:
Sizes
| Caterpillar track height | 2200 mm and 2305 mm |
| Width between caterpillar tracks | 6600 mm and 6770 mm |
| Height to cab upper part | 8150 mm and 7830 mm |
| Caterpillar track length on ground level | 6200 mm and 6660 mm |
Shovel boom/sections 1
| Backhoe shovel boom / section | Boom 31'2" (9500mm)/Section 14'9" (4500mm) and Boom 9600mm/Section 4500mm |
| Maximum cut height | 17000 mm and 17690 mm |
Shovel
| Bucket initial volume | 21 m3 and 21 m3 |
Operation
| Operating voltage | 24 V and 24 V |
Motor
| Model | 2x KTA 38 C-1200 and QSKTA60-C |
| Aspiration | Turbocharging with charge air cooler and turbocharging |
| Manufacturer | Cummins and Cummins |
Loading bucket
| Maximum cut height | 14200 mm and 16300 mm |
Carrier
| Backhoe shovel support width 1 | 1200 mm and 1270 mm |
| Track width | 5400 mm and 5500 mm |
| Rear platform swing radius | 6780 mm and 6780 mm |
Images
Sizes
| 5. Clearance | 980 mm | 5. Clearance | 905 mm |
| 7. Height to cab upper part | 8150 mm | 7. Height to cab upper part | 7830 mm |
| 2. Width between caterpillar tracks | 6600 mm | 2. Width between caterpillar tracks | 6770 mm |
| 4. Caterpillar track length on ground level | 6200 mm | 4. Caterpillar track length on ground level | 6660 mm |
Loading bucket
| 17. Maximum cut height | 14200 mm | 17. Maximum cut height | 16300 mm |
| 18. Maximum unloading height | 10800 mm | 18. Maximum unloading height | 10990 mm |
| 19. Maximum digging radius | 15300 mm | 19. Maximum digging radius | 3910 mm |
| 20. Maximum excavation depth | 2500 mm | 20. Maximum excavation depth | 3910 mm |
Carrier
| 6. Track width | 5400 mm | 6. Track width | 5500 mm |