- Home/
- Comparison/
- Mining Excavator/
- Terex RH170 vs. Komatsu PC8000
Terex RH170 vs. Komatsu PC8000
4 reasons to buy Terex RH170:
Operation
| Rotation speed | 4.7 rev / min and 3.5 rev / min | 26 % more or 1.2 rev |
| Generator current strength | 350 amperes and 100 amperes | 71 % more or 250 amperes |
Motor
| Cylinders number | 24 and 16 | 33 % more or 8 |
Carrier
| Maximum travel speed | 2.6 km/h and 2.2 km/h | 15 % more or 0.4 km/h |
10 reasons to buy Komatsu PC8000:
Shovel boom/sections 1
| Maximum excavation depth | 8090 mm and 7000 mm | 13 % more or 1090 mm |
Shovel
| Bucket initial volume | 38 m3 and 21 m3 | 45 % more or 17 m3 |
Operation
| Hydraulic system fluid volume | 11500 l. and 3000 l. | 74 % more or 8500 l. |
| Fuel Capacity | 14000 l. and 6300 l. | 55 % more or 7700 l. |
Motor
| Effective power | 3000 kW and 1491.4 kW | 50 % more or 1508.6 kW |
| Power measured at | 1800 rev / min and 1750 rev / min | 3 % more or 50 rev |
Loading bucket
| Maximum digging radius | 16100 mm and 15300 mm | 5 % more or 800 mm |
Carrier
| Upper rollers number | 3 and 2 | 33 % more or 1 |
| Lower rollers number | 8 and 7 | 12 % more or 1 |
| Track shoes number on either side | 48 and 42 | 12 % more or 6 |
Neutral reasons:
Shovel boom/sections 1
| Backhoe shovel boom / section | Boom 31'2" (9500mm)/Section 14'9" (4500mm) and Boom 37'9" (11500mm) / Section 18' (5500mm) |
Operation
| Operating voltage | 24 V and 24 V |
Motor
| Manufacturer | Cummins and Komatsu |
| Model | 2x KTA 38 C-1200 and 2 x SDA16V160 |
| Aspiration | Turbocharging with charge air cooler and turbocharging and cooling at the outlet |
Loading bucket
| Handle pressure force | 2237.1 Nm and 2320 Nm |
| Loading bucket | Boom 7.3 m (23'11") Section 4.6 m (15'1'') and Boom 29'10" (9100mm) / Section 11'2" (3400mm) |
Carrier
| Backhoe shovel support width 1 | 1200 mm and 4600 mm |
Images
Loading bucket
| 19. Maximum digging radius | 15300 mm | 19. Maximum digging radius | 16100 mm |