- Home/
- Comparison/
- Mining Excavator/
- Terex RH170 vs. Liebherr R9800
Terex RH170 vs. Liebherr R9800
6 reasons to buy Terex RH170:
Shovel
Bucket minimum volume | 18 m3 and 38 m3 | 53 % less or 20 m3 |
Operation
Rotation speed | 4.7 rev / min and 3.6 rev / min | 23 % more or 1.1 rev |
Generator current strength | 350 amperes and 260 amperes | 26 % more or 90 amperes |
Carrier
Excavator specific ground pressure with support 1 | 235.1 kPa and 263.8 kPa | 11 % less or 28.7 kPa |
Maximum travel speed | 2.6 km/h and 1.8 km/h | 31 % more or 0.8 km/h |
Lower rollers number | 7 and 6 | 14 % more or 1 |
16 reasons to buy Liebherr R9800:
Sizes
Caterpillar track length | 10846 mm and 8070 mm | 26 % more or 2776 mm |
Clearance | 1572 mm and 980 mm | 38 % more or 592 mm |
Upper structure clearance | 3597 mm and 2560 mm | 29 % more or 1037 mm |
Shovel boom/sections 1
Maximum excavation depth | 9000 mm and 7000 mm | 22 % more or 2000 mm |
Shovel
Maximum bucket volume | 42 m3 and 21 m3 | 50 % more or 21 m3 |
Bucket initial volume | 42 m3 and 21 m3 | 50 % more or 21 m3 |
Operation
Hydraulic system fluid volume | 10000 l. and 3000 l. | 70 % more or 7000 l. |
Fuel Capacity | 19691.7 l. and 6300 l. | 68 % more or 13391.7 l. |
Motor
Full power | 2982.8 kW and 1789.7 kW | 40 % more or 1193.1 kW |
Power measured at | 1800 rev / min and 1750 rev / min | 3 % more or 50 rev |
Displacement | 60 l. and 37.8 l. | 37 % more or 22.2 l. |
Cylinders number | 32 and 24 | 25 % more or 8 |
Loading bucket
Maximum unloading height | 13000 mm and 10800 mm | 17 % more or 2200 mm |
Maximum digging radius | 15900 mm and 15300 mm | 4 % more or 600 mm |
Carrier
Unloaded backhoe shovel operational weight with support 1 | 793000 kg and 394400 kg | 50 % more or 398600 kg |
Upper rollers number | 3 and 2 | 33 % more or 1 |
Neutral reasons:
Sizes
Height to cab upper part | 8150 mm and 10338 mm |
Width between caterpillar tracks | 6600 mm and 8330 mm |
Caterpillar track length on ground level | 6200 mm and 8100 mm |
Caterpillar track height | 2200 mm and 3261 mm |
Shovel boom/sections 1
Maximum cut height | 17000 mm and 16200 mm |
Backhoe shovel boom / section | Boom 31'2" (9500mm)/Section 14'9" (4500mm) and 11.75 m boom / 5.0 m Section |
Operation
Operating voltage | 24 V and 24 V |
Motor
Model | 2x KTA 38 C-1200 and QSK60 2 level |
Aspiration | Turbocharging with charge air cooler and Turbocharging with subsequent air cooling (by a cooling radiator) |
Manufacturer | Cummins and Cummins |
Loading bucket
Loading bucket | Boom 7.3 m (23'11") Section 4.6 m (15'1'') and 8.55 m boom / 5.10 m Section |
Height to boom top with bucket | 8200 mm and 9280 mm |
Handle pressure force | 2237.1 Nm and 2950 Nm |
Carrier
Track width | 5400 mm and 6700 mm |
Backhoe shovel support width 1 | 1200 mm and 1630 mm |
Rear platform swing radius | 6780 mm and 8600 mm |
Images
Sizes
2. Width between caterpillar tracks | 6600 mm | 2. Width between caterpillar tracks | 8330 mm |
4. Caterpillar track length on ground level | 6200 mm | 4. Caterpillar track length on ground level | 8100 mm |
5. Clearance | 980 mm | 5. Clearance | 1572 mm |
7. Height to cab upper part | 8150 mm | 7. Height to cab upper part | 10338 mm |
Loading bucket
18. Maximum unloading height | 10800 mm | 18. Maximum unloading height | 13000 mm |
19. Maximum digging radius | 15300 mm | 19. Maximum digging radius | 15900 mm |
16. Height to boom top with bucket | 8200 mm | 16. Height to boom top with bucket | 9280 mm |
Carrier
6. Track width | 5400 mm | 6. Track width | 6700 mm |