- Home/
- Comparison/
- Mining Excavator/
- Terex RH170 vs. Liebherr R984C
Terex RH170 vs. Liebherr R984C
13 reasons to buy Terex RH170:
Sizes
Caterpillar track length | 8070 mm and 6471 mm | 20 % more or 1599 mm |
Clearance | 980 mm and 860 mm | 12 % more or 120 mm |
Upper structure clearance | 2560 mm and 1830 mm | 29 % more or 730 mm |
Shovel
Bucket initial volume | 21 m3 and 7 m3 | 67 % more or 14 m3 |
Maximum bucket volume | 21 m3 and 10.6 m3 | 50 % more or 10.4 m3 |
Operation
Fuel Capacity | 6300 l. and 1585 l. | 75 % more or 4715 l. |
Hydraulic system fluid volume | 3000 l. and 1660 l. | 45 % more or 1340 l. |
Generator current strength | 350 amperes and 100 amperes | 71 % more or 250 amperes |
Motor
Displacement | 37.8 l. and 18.9 l. | 50 % more or 18.9 l. |
Effective power | 1491.4 kW and 529.4 kW | 65 % more or 962.0 kW |
Cylinders number | 24 and 6 | 75 % more or 18 |
Loading bucket
Maximum digging radius | 15300 mm and 10800 mm | 29 % more or 4500 mm |
Maximum unloading height | 10800 mm and 8900 mm | 18 % more or 1900 mm |
7 reasons to buy Liebherr R984C:
Shovel boom/sections 1
Maximum excavation depth | 7950 mm and 7000 mm | 12 % more or 950 mm |
Shovel
Bucket minimum volume | 5.7 m3 and 18 m3 | 68 % less or 12.3 m3 |
Operation
Rotation speed | 5.2 rev / min and 4.7 rev / min | 10 % more or 0.5 rev |
Motor
Power measured at | 2100 rev / min and 1750 rev / min | 17 % more or 350 rev |
Loading bucket
Maximum excavation depth | 3800 mm and 2500 mm | 34 % more or 1300 mm |
Carrier
Maximum travel speed | 2.9 km/h and 2.6 km/h | 10 % more or 0.3 km/h |
Lower rollers number | 9 and 7 | 22 % more or 2 |
Neutral reasons:
Sizes
Caterpillar track length on ground level | 6200 mm and 5055 mm |
Caterpillar track height | 2200 mm and 1745 mm |
Width between caterpillar tracks | 6600 mm and 4830 mm |
Height to cab upper part | 8150 mm and 4455 mm |
Shovel boom/sections 1
Backhoe shovel boom / section | Boom 31'2" (9500mm)/Section 14'9" (4500mm) and 7.8 m boom / 3.4 m Section |
Maximum cut height | 17000 mm and 14000 mm |
Operation
Operating voltage | 24 V and 24 V |
Motor
Model | 2x KTA 38 C-1200 and QSK-19 C 750 |
Aspiration | Turbocharging with charge air cooler and turbocharged engine with reduced emissions |
Manufacturer | Cummins and Cummins |
Loading bucket
Loading bucket | Boom 7.3 m (23'11") Section 4.6 m (15'1'') and Bucket attachment |
Height to boom top with bucket | 8200 mm and 5400 mm |
Maximum cut height | 14200 mm and 9300 mm |
Carrier
Rear platform swing radius | 6780 mm and 4805 mm |
Upper rollers number | 2 and 2 |
Track width | 5400 mm and 3986.8 mm |
Backhoe shovel support width 1 | 1200 mm and 500 mm |
Images
Sizes
5. Clearance | 980 mm | 5. Clearance | 860 mm |
7. Height to cab upper part | 8150 mm | 7. Height to cab upper part | 4455 mm |
2. Width between caterpillar tracks | 6600 mm | 2. Width between caterpillar tracks | 4830 mm |
4. Caterpillar track length on ground level | 6200 mm | 4. Caterpillar track length on ground level | 5055 mm |
Loading bucket
16. Height to boom top with bucket | 8200 mm | 16. Height to boom top with bucket | 5400 mm |
17. Maximum cut height | 14200 mm | 17. Maximum cut height | 9300 mm |
18. Maximum unloading height | 10800 mm | 18. Maximum unloading height | 8900 mm |
19. Maximum digging radius | 15300 mm | 19. Maximum digging radius | 10800 mm |
20. Maximum excavation depth | 2500 mm | 20. Maximum excavation depth | 3800 mm |
Carrier
6. Track width | 5400 mm | 6. Track width | 3986.8 mm |