vs.

      Case 435 vs. Case SR175

      9 reasons to buy Case 435:

      Sizes

      Clearance 228 mm and 177.8 mm 22 % more or 50.2 mm
      Radius at maximum lifting and unloading 760 mm and 541 mm 29 % more or 219 mm

      Operation

      Hydraulic system fluid volume 22 l. and 20 l. 9 % more or 2 l.
      Chain transmission fluid volume on either side 7.6 l. and 6.7 l. 12 % more or 0.9 l.
      Maximum speed 18.8 km/h and 18.5 km/h 2 % more or 0.3 km/h

      Motor

      Full power 58 kW and 44.7 kW 23 % more or 13.3 kW
      Effective power 54 kW and 42.5 kW 21 % more or 11.5 kW
      Displacement 3.4 l. and 2.2 l. 35 % more or 1.2 l.

      Hydraulic system

      Pump bandwidth 79.5 l/min and 36 l/min 55 % more or 43.5 l/min

      8 reasons to buy Case SR175:

      Sizes

      Turning radius with bucket from center 1991.4 mm and 2000 mm 0 % less or 8.6 mm
      Ground clearance at maximum lifting and unloading 2470 mm and 2300 mm 7 % more or 170 mm
      Machine rear swing radius from center 1597.7 mm and 2000 mm 20 % less or 402.3 mm

      Operation

      Fuel Capacity 75.7 l. and 66 l. 13 % more or 9.7 l.
      Engine oil volume 8.5 l. and 8 l. 6 % more or 0.5 l.

      Motor

      Power measured at 2900 rev / min and 2300 rev / min 21 % more or 600 rev
      Cylinders number 4 and 3 25 % more or 1

      Load-transfer device

      Tipping load 1587.6 kg and 2086 kg 24 % less or 498.4 kg

      Neutral reasons:

      Sizes

      Length with bucket 3440 mm and 3300 mm
      Length without bucket 2620 mm and 2690 mm
      Between tyres width 1550 mm and 1630 mm
      Height to cab upper part 2030 mm and 1970 mm
      Wheelbase 1140 mm and 1130 mm

      Operation

      Generator current strength 95 amperes and 95 amperes
      Working weight 3098 kg and 2812.3 kg
      Tyre size 12.00 x 16.5 and 10 x 16.5
      Operating voltage 12 V and 12 V

      Motor

      Model Family III 334T/M2, 2 level and ISM N844T/M3
      Aspiration turbocharging and turbocharging

      Load-transfer device

      Workload range 1043 kg and 793.8 kg

      Hydraulic system

      Type of pump gear type pump and gear type pump
      Overflow valve pressure 21029 kPa and 20684.3 kPa

      Images

      Sizes

      3. Height to cab upper part 2030 mm 3. Height to cab upper part 1970 mm
      4. Wheelbase 1140 mm 4. Wheelbase 1130 mm
      5. Clearance 228 mm 5. Clearance 177.8 mm
      6. Length without bucket 2620 mm 6. Length without bucket 2690 mm
      7. Ground clearance at maximum lifting and unloading 2300 mm 7. Ground clearance at maximum lifting and unloading 2470 mm
      8. Radius at maximum lifting and unloading 760 mm 8. Radius at maximum lifting and unloading 541 mm
      1. Length with bucket 3440 mm 1. Length with bucket 3300 mm
      2. Between tyres width 1550 mm 2. Between tyres width 1630 mm