- Home/
- Comparison/
- Skid Loader with Steer/
- Case 440 serie III vs. JCB 260
Case 440 serie III vs. JCB 260
6 reasons to buy Case 440 serie III:
Sizes
Machine rear swing radius from center | 1280 mm and 1760 mm | 27 % less or 480 mm |
Turning radius with bucket from center | 1950 mm and 2200 mm | 11 % less or 250 mm |
Operation
Working speed | 11.2 km/h and 10.9 km/h | 3 % more or 0.3 km/h |
Motor
Full power | 67 kW and 62.6 kW | 7 % more or 4.4 kW |
Displacement | 4.5 l. and 4.4 l. | 2 % more or 0.1 l. |
Load-transfer device
Tipping load | 1996 kg and 2471.2 kg | 19 % less or 475.2 kg |
11 reasons to buy JCB 260:
Sizes
Ground clearance at maximum lifting and unloading | 2460 mm and 2450 mm | 0 % more or 10 mm |
Clearance | 238 mm and 229 mm | 4 % more or 9 mm |
Radius at maximum lifting and unloading | 870 mm and 540 mm | 38 % more or 330 mm |
Operation
Engine oil volume | 14 l. and 12 l. | 14 % more or 2 l. |
Chain transmission fluid volume on either side | 23 l. and 7.6 l. | 67 % more or 15.4 l. |
Hydraulic system fluid volume | 60 l. and 50 l. | 17 % more or 10 l. |
Maximum speed | 20 km/h and 11.2 km/h | 44 % more or 8.8 km/h |
Fuel Capacity | 103 l. and 83.3 l. | 19 % more or 19.7 l. |
Cooling system fluid volume | 15.5 l. and 11.4 l. | 26 % more or 4.1 l. |
Motor
Power measured at | 2400 rev / min and 2300 rev / min | 4 % more or 100 rev |
Hydraulic system
Pump bandwidth | 87.1 l/min and 83 l/min | 5 % more or 4.1 l/min |
Neutral reasons:
Sizes
Height to cab upper part | 2030 mm and 2090 mm |
Wheelbase | 1100 mm and 1220 mm |
Length with bucket | 3230 mm and 3690 mm |
Between tyres width | 1630 mm and 1830 mm |
Operation
Tyre size | 12.00 x 16.5 10 layers and 12 x 16.5 |
Operating voltage | 12 V and 12 V |
Generator current strength | 95 amperes and 95 amperes |
Working weight | 3193 kg and 3615.6 kg |
Motor
Manufacturer | Case and JCB |
Model | 445T/M3 diesel III Level III certified and TC-63 |
Aspiration | turbocharging and turbocharging |
Load-transfer device
Workload range | 998 kg and 1179.3 kg |
Hydraulic system
Overflow valve pressure | 21029 kPa and 22994 kPa |
Images
Sizes
1. Length with bucket | 3230 mm | 1. Length with bucket | 3690 mm |
2. Between tyres width | 1630 mm | 2. Between tyres width | 1830 mm |
3. Height to cab upper part | 2030 mm | 3. Height to cab upper part | 2090 mm |
4. Wheelbase | 1100 mm | 4. Wheelbase | 1220 mm |
5. Clearance | 229 mm | 5. Clearance | 238 mm |
7. Ground clearance at maximum lifting and unloading | 2450 mm | 7. Ground clearance at maximum lifting and unloading | 2460 mm |
8. Radius at maximum lifting and unloading | 540 mm | 8. Radius at maximum lifting and unloading | 870 mm |