vs.

      Case SR130 vs. Case 440

      6 reasons to buy Case SR130:

      Sizes

      Machine rear swing radius from center 1432.6 mm and 1500 mm 4 % less or 67.4 mm
      Turning radius with bucket from center 1920.2 mm and 1950 mm 2 % less or 29.8 mm

      Operation

      Generator current strength 120 amperes and 95 amperes 21 % more or 25 amperes
      Chain transmission fluid volume on either side 6.3 l. and 5.7 l. 10 % more or 0.6 l.

      Motor

      Power measured at 2900 rev / min and 2300 rev / min 21 % more or 600 rev

      Load-transfer device

      Tipping load 1179.3 kg and 1996 kg 41 % less or 816.7 kg

      10 reasons to buy Case 440:

      Sizes

      Clearance 229 mm and 177.8 mm 22 % more or 51.2 mm
      Radius at maximum lifting and unloading 540 mm and 469.9 mm 13 % more or 70.1 mm
      Ground clearance at maximum lifting and unloading 2450 mm and 2250 mm 8 % more or 200 mm

      Operation

      Fuel Capacity 83.3 l. and 60.6 l. 27 % more or 22.7 l.
      Engine oil volume 12 l. and 7.5 l. 37 % more or 4.5 l.
      Hydraulic system fluid volume 50.2 l. and 15.1 l. 70 % more or 35.1 l.

      Motor

      Full power 66 kW and 34.3 kW 48 % more or 31.7 kW
      Effective power 61.1 kW and 32.1 kW 47 % more or 29.0 kW
      Displacement 4.5 l. and 2 l. 56 % more or 2.5 l.

      Hydraulic system

      Pump bandwidth 79.4 l/min and 59 l/min 26 % more or 20.4 l/min

      Neutral reasons:

      Sizes

      Length without bucket 2440 mm and 2640 mm
      Between tyres width 1520 mm and 1340 mm
      Height to cab upper part 1920 mm and 1950 mm
      Wheelbase 940 mm and 1100 mm
      Length with bucket 3030 mm and 3230 mm

      Operation

      Tyre size 10 x 16.5 and 12.00 x 16.5
      Operating voltage 12 V and 12 V
      Working weight 2268 kg and 3167 kg

      Motor

      Model ISM N844T/M3 and Family III 445T/M2, 2 level
      Aspiration natural aspiration and turbocharging
      Cylinders number 4 and 4

      Load-transfer device

      Workload range 589.7 kg and 998 kg

      Hydraulic system

      Type of pump gear type pump and gear type pump
      Overflow valve pressure 20684.3 kPa and 20684.3 kPa

      Images

      Sizes

      1. Length with bucket 3030 mm 1. Length with bucket 3230 mm
      2. Between tyres width 1520 mm 2. Between tyres width 1340 mm
      3. Height to cab upper part 1920 mm 3. Height to cab upper part 1950 mm
      4. Wheelbase 940 mm 4. Wheelbase 1100 mm
      5. Clearance 177.8 mm 5. Clearance 229 mm
      6. Length without bucket 2440 mm 6. Length without bucket 2640 mm
      7. Ground clearance at maximum lifting and unloading 2250 mm 7. Ground clearance at maximum lifting and unloading 2450 mm
      8. Radius at maximum lifting and unloading 469.9 mm 8. Radius at maximum lifting and unloading 540 mm