vs.

      Case SR175 vs. Case SR200

      7 reasons to buy Case SR175:

      Sizes

      Radius at maximum lifting and unloading 541 mm and 515.6 mm 5 % more or 25.4 mm
      Turning radius with bucket from center 1991.4 mm and 2029.5 mm 2 % less or 38.1 mm

      Operation

      Working speed 11.9 km/h and 11.6 km/h 3 % more or 0.3 km/h

      Motor

      Torque measured at 1800 rev / min and 1400 rev / min 22 % more or 400 rev
      Power measured at 2900 rev / min and 2500 rev / min 14 % more or 400 rev

      Load-transfer device

      Tipping load 1587.6 kg and 1814.4 kg 12 % less or 226.8 kg

      Hydraulic system

      Pump bandwidth 36 l/min and 31 l/min 14 % more or 5 l/min

      8 reasons to buy Case SR200:

      Sizes

      Ground clearance at maximum lifting and unloading 2500 mm and 2470 mm 1 % more or 30 mm
      Clearance 203.2 mm and 177.8 mm 12 % more or 25.4 mm

      Operation

      Engine oil volume 10 l. and 8.5 l. 15 % more or 1.5 l.
      Maximum speed 19.2 km/h and 18.5 km/h 4 % more or 0.7 km/h

      Motor

      Maximum torque 275.2 Nm and 170.8 Nm 38 % more or 104.4 Nm
      Full power 55.2 kW and 44.7 kW 19 % more or 10.5 kW
      Effective power 52.2 kW and 42.5 kW 19 % more or 9.7 kW
      Displacement 3.2 l. and 2.2 l. 31 % more or 1.0 l.

      Neutral reasons:

      Sizes

      Length with bucket 3300 mm and 3300 mm
      Length without bucket 2690 mm and 2670 mm
      Between tyres width 1630 mm and 1630 mm
      Height to cab upper part 1970 mm and 2000 mm
      Wheelbase 1130 mm and 1130 mm
      Machine rear swing radius from center 1597.7 mm and 1597.7 mm

      Operation

      Working weight 2812.3 kg and 3129.8 kg
      Fuel Capacity 75.7 l. and 75.7 l.
      Hydraulic system fluid volume 20 l. and 20 l.
      Chain transmission fluid volume on either side 6.7 l. and 6.7 l.
      Tyre size 10 x 16.5 and 10 x 12.5
      Operating voltage 12 V and 12 V
      Generator current strength 95 amperes and 95 amperes

      Motor

      Model ISM N844T/M3 and 432T/M3
      Cylinders number 4 and 4
      Aspiration turbocharging and turbocharging

      Load-transfer device

      Shovel width 1676.4 mm and 1676.4 mm
      Workload range 793.8 kg and 907.2 kg

      Hydraulic system

      Type of pump gear type pump and gear type pump
      Overflow valve pressure 20684.3 kPa and 20684.3 kPa

      Images

      Sizes

      3. Height to cab upper part 1970 mm 3. Height to cab upper part 2000 mm
      4. Wheelbase 1130 mm 4. Wheelbase 1130 mm
      5. Clearance 177.8 mm 5. Clearance 203.2 mm
      6. Length without bucket 2690 mm 6. Length without bucket 2670 mm
      7. Ground clearance at maximum lifting and unloading 2470 mm 7. Ground clearance at maximum lifting and unloading 2500 mm
      8. Radius at maximum lifting and unloading 541 mm 8. Radius at maximum lifting and unloading 515.6 mm
      1. Length with bucket 3300 mm 1. Length with bucket 3300 mm
      2. Between tyres width 1630 mm 2. Between tyres width 1630 mm