vs.

      Case SR175 vs. JCB 300

      6 reasons to buy Case SR175:

      Sizes

      Ground clearance at maximum lifting and unloading 2470 mm and 2460 mm 0 % more or 10 mm
      Machine rear swing radius from center 1597.7 mm and 1760 mm 9 % less or 162.3 mm
      Turning radius with bucket from center 1991.4 mm and 2200 mm 9 % less or 208.6 mm

      Operation

      Working speed 11.9 km/h and 10.9 km/h 8 % more or 1.0 km/h

      Motor

      Power measured at 2900 rev / min and 2400 rev / min 17 % more or 500 rev

      Load-transfer device

      Tipping load 1587.6 kg and 2732.4 kg 42 % less or 1144.8 kg

      11 reasons to buy JCB 300:

      Sizes

      Clearance 238 mm and 177.8 mm 25 % more or 60.2 mm
      Radius at maximum lifting and unloading 900 mm and 541 mm 40 % more or 359 mm

      Operation

      Chain transmission fluid volume on either side 23 l. and 6.7 l. 71 % more or 16.3 l.
      Maximum speed 20 km/h and 18.5 km/h 7 % more or 1.5 km/h
      Fuel Capacity 103 l. and 75.7 l. 27 % more or 27.3 l.
      Engine oil volume 14 l. and 8.5 l. 39 % more or 5.5 l.
      Hydraulic system fluid volume 60 l. and 20 l. 67 % more or 40 l.

      Motor

      Maximum torque 408.1 Nm and 170.8 Nm 58 % more or 237.3 Nm
      Full power 68.6 kW and 44.7 kW 35 % more or 23.9 kW
      Displacement 4.4 l. and 2.2 l. 50 % more or 2.2 l.

      Hydraulic system

      Pump bandwidth 87.1 l/min and 36 l/min 59 % more or 51.1 l/min

      Neutral reasons:

      Sizes

      Height to cab upper part 1970 mm and 2090 mm
      Wheelbase 1130 mm and 1220 mm
      Length with bucket 3300 mm and 3780 mm
      Between tyres width 1630 mm and 1830 mm

      Operation

      Working weight 2812.3 kg and 3823.8 kg
      Tyre size 10 x 16.5 and 12 x 16.5
      Operating voltage 12 V and 12 V
      Generator current strength 95 amperes and 95 amperes

      Motor

      Aspiration turbocharging and turbocharging
      Model ISM N844T/M3 and TC-68
      Torque measured at 1800 rev / min and 1800 rev / min

      Load-transfer device

      Workload range 793.8 kg and 1360.8 kg

      Hydraulic system

      Overflow valve pressure 20684.3 kPa and 22994 kPa

      Images

      Sizes

      1. Length with bucket 3300 mm 1. Length with bucket 3780 mm
      2. Between tyres width 1630 mm 2. Between tyres width 1830 mm
      3. Height to cab upper part 1970 mm 3. Height to cab upper part 2090 mm
      4. Wheelbase 1130 mm 4. Wheelbase 1220 mm
      5. Clearance 177.8 mm 5. Clearance 238 mm
      7. Ground clearance at maximum lifting and unloading 2470 mm 7. Ground clearance at maximum lifting and unloading 2460 mm
      8. Radius at maximum lifting and unloading 541 mm 8. Radius at maximum lifting and unloading 900 mm