vs.

      Case SR220 vs. JCB 300

      5 reasons to buy Case SR220:

      Sizes

      Turning radius with bucket from center 2138.7 mm and 2200 mm 3 % less or 61.3 mm
      Ground clearance at maximum lifting and unloading 2600 mm and 2460 mm 5 % more or 140 mm

      Operation

      Working speed 11.6 km/h and 10.9 km/h 6 % more or 0.7 km/h

      Motor

      Power measured at 2500 rev / min and 2400 rev / min 4 % more or 100 rev

      Load-transfer device

      Tipping load 1995.8 kg and 2732.4 kg 27 % less or 736.6 kg

      13 reasons to buy JCB 300:

      Sizes

      Radius at maximum lifting and unloading 900 mm and 495.3 mm 45 % more or 404.7 mm
      Machine rear swing radius from center 1760 mm and 1788.2 mm 2 % less or 28.2 mm
      Clearance 238 mm and 203.2 mm 15 % more or 34.8 mm

      Operation

      Maximum speed 20 km/h and 19.2 km/h 4 % more or 0.8 km/h
      Fuel Capacity 103 l. and 96.5 l. 6 % more or 6.5 l.
      Engine oil volume 14 l. and 10 l. 29 % more or 4 l.
      Hydraulic system fluid volume 60 l. and 22.4 l. 63 % more or 37.6 l.
      Chain transmission fluid volume on either side 23 l. and 7.4 l. 68 % more or 15.6 l.

      Motor

      Displacement 4.4 l. and 3.2 l. 27 % more or 1.2 l.
      Torque measured at 1800 rev / min and 1400 rev / min 22 % more or 400 rev
      Maximum torque 408.1 Nm and 305.1 Nm 25 % more or 103.0 Nm
      Full power 68.6 kW and 61.1 kW 11 % more or 7.5 kW

      Hydraulic system

      Pump bandwidth 87.1 l/min and 46 l/min 47 % more or 41.1 l/min

      Neutral reasons:

      Sizes

      Length with bucket 3600 mm and 3780 mm
      Between tyres width 1800 mm and 1830 mm
      Height to cab upper part 2000 mm and 2090 mm
      Wheelbase 1300 mm and 1220 mm

      Operation

      Tyre size 12 x 16.5 and 12 x 16.5
      Working weight 3356.6 kg and 3823.8 kg
      Operating voltage 12 V and 12 V
      Generator current strength 95 amperes and 95 amperes

      Motor

      Aspiration turbocharging and turbocharging
      Manufacturer Case and JCB
      Model 432T/M3 and TC-68

      Load-transfer device

      Workload range 997.9 kg and 1360.8 kg

      Hydraulic system

      Overflow valve pressure 20684.3 kPa and 22994 kPa

      Images

      Sizes

      1. Length with bucket 3600 mm 1. Length with bucket 3780 mm
      2. Between tyres width 1800 mm 2. Between tyres width 1830 mm
      3. Height to cab upper part 2000 mm 3. Height to cab upper part 2090 mm
      4. Wheelbase 1300 mm 4. Wheelbase 1220 mm
      5. Clearance 203.2 mm 5. Clearance 238 mm
      7. Ground clearance at maximum lifting and unloading 2600 mm 7. Ground clearance at maximum lifting and unloading 2460 mm
      8. Radius at maximum lifting and unloading 495.3 mm 8. Radius at maximum lifting and unloading 900 mm