- Home/
- Comparison/
- Skid Loader with Steer/
- Case SV250 vs. Case 445 serie III
Case SV250 vs. Case 445 serie III
7 reasons to buy Case SV250:
Sizes
Ground clearance at maximum lifting and unloading | 2600 mm and 2290 mm | 12 % more or 310 mm |
Operation
Working speed | 11.6 km/h and 11.2 km/h | 3 % more or 0.4 km/h |
Fuel Capacity | 96.5 l. and 65.5 l. | 32 % more or 31.0 l. |
Maximum speed | 19.2 km/h and 11.2 km/h | 42 % more or 8.0 km/h |
Engine oil volume | 10 l. and 8.5 l. | 15 % more or 1.5 l. |
Motor
Power measured at | 2500 rev / min and 2300 rev / min | 8 % more or 200 rev |
Full power | 61.1 kW and 61 kW | 0 % more or 0.1 kW |
8 reasons to buy Case 445 serie III:
Sizes
Clearance | 236 mm and 203.2 mm | 14 % more or 32.8 mm |
Radius at maximum lifting and unloading | 930 mm and 744.2 mm | 20 % more or 185.8 mm |
Machine rear swing radius from center | 1360 mm and 1788.2 mm | 24 % less or 428.2 mm |
Turning radius with bucket from center | 2120 mm and 2128.5 mm | 0 % less or 8.5 mm |
Operation
Chain transmission fluid volume on either side | 7.6 l. and 7.4 l. | 3 % more or 0.2 l. |
Hydraulic system fluid volume | 41.6 l. and 22.8 l. | 45 % more or 18.8 l. |
Motor
Effective power | 57 kW and 56.7 kW | 1 % more or 0.3 kW |
Hydraulic system
Pump bandwidth | 90.1 l/min and 46 l/min | 49 % more or 44.1 l/min |
Neutral reasons:
Sizes
Height to cab upper part | 2000 mm and 2110 mm |
Wheelbase | 1300 mm and 1140 mm |
Length with bucket | 3600 mm and 3340 mm |
Length without bucket | 3000 mm and 2650 mm |
Between tyres width | 1700 mm and 1830 mm |
Operation
Working weight | 3628.7 kg and 3683 kg |
Tyre size | 12 x 16.5 and 12.00 x 16.5 10 layers |
Operating voltage | 12 V and 12 V |
Generator current strength | 95 amperes and 95 amperes |
Motor
Displacement | 3.2 l. and 3.2 l. |
Manufacturer | Case and Case |
Model | 432T/M3 and 432T/M3 diesel III Level III certified |
Cylinders number | 4 and 4 |
Aspiration | turbocharging and turbocharging |
Load-transfer device
Workload range | 1134 kg and 1134 kg |
Tipping load | 2268 kg and 2268 kg |
Hydraulic system
Overflow valve pressure | 20684.3 kPa and 21029 kPa |
Type of pump | gear type pump and gear type pump |
Images
Sizes
1. Length with bucket | 3600 mm | 1. Length with bucket | 3340 mm |
2. Between tyres width | 1700 mm | 2. Between tyres width | 1830 mm |
3. Height to cab upper part | 2000 mm | 3. Height to cab upper part | 2110 mm |
4. Wheelbase | 1300 mm | 4. Wheelbase | 1140 mm |
5. Clearance | 203.2 mm | 5. Clearance | 236 mm |
6. Length without bucket | 3000 mm | 6. Length without bucket | 2650 mm |
7. Ground clearance at maximum lifting and unloading | 2600 mm | 7. Ground clearance at maximum lifting and unloading | 2290 mm |
8. Radius at maximum lifting and unloading | 744.2 mm | 8. Radius at maximum lifting and unloading | 930 mm |