vs.

      Case 21E vs. Zettelmeyer ZL5002

      6 reasons to buy Case 21E:

      Operation

      Turn radius 3847 mm and 7260 mm 47 % less or 3413 mm

      Motor

      Power measured at 2300 rev / min and 2100 rev / min 9 % more or 200 rev
      Torque measured at 1700 rev / min and 1300 rev / min 24 % more or 400 rev

      Hydraulic system

      Lifting time 6 sec and 6.5 sec 8 % less or 0.5 sec
      Unloading time 1 sec and 1.7 sec 41 % less or 0.7 sec
      Lowering time 3 sec and 4.6 sec 35 % less or 1.6 sec

      20 reasons to buy Zettelmeyer ZL5002:

      Sizes

      Radius at maximum lifting and unloading 1140 mm and 851 mm 25 % more or 289 mm
      Clearance 490 mm and 330 mm 33 % more or 160 mm

      Shovel

      Unloading ground clearance at maximum lifting 3230 mm and 2502 mm 23 % more or 728 mm

      Operation

      Fuel Capacity 360 l. and 100 l. 72 % more or 260 l.
      Hydraulic system fluid volume 230 l. and 56 l. 76 % more or 174 l.
      Engine oil volume 26.5 l. and 10 l. 62 % more or 16.5 l.
      Front axle / differential fluid volume 54 l. and 7.5 l. 86 % more or 46.5 l.
      Rear axle / differential fluid volume 51 l. and 7.5 l. 85 % more or 43.5 l.
      Static tipping weight 17750 kg and 3330 kg 81 % more or 14420 kg
      Generator current strength 65 amperes and 55 amperes 15 % more or 10 amperes

      Motor

      Effective power 206 kW and 38 kW 82 % more or 168 kW
      Full power 216 kW and 40.4 kW 81 % more or 175.6 kW
      Displacement 10.2 l. and 3.1 l. 70 % more or 7.1 l.
      Cylinders number 6 and 4 33 % more or 2
      Maximum torque 1180 Nm and 169 Nm 86 % more or 1011 Nm

      Hydraulic system

      Pump bandwidth 298 l/min and 51 l/min 83 % more or 247 l/min

      Gear box

      Maximum reverse gear 25 km/h and 20 km/h 20 % more or 5 km/h
      Forward gears number 4 and 2 50 % more or 2
      Reverse gears number 3 and 2 33 % more or 1
      Maximum forward speed 38 km/h and 20 km/h 47 % more or 18 km/h

      Neutral reasons:

      Sizes

      Hinge axis maximum height 3252 mm and 4450 mm
      Height to cab upper part 2690 mm and 3490 mm
      Wheelbase 2182 mm and 3700 mm
      Length with bucket on ground level 5315 mm and 8830 mm

      Shovel

      Shovel width 1900 mm and 3000 mm

      Operation

      Operating voltage 12 V and 24 V
      Rear axle oscillating 24 degrees and 24 degrees
      Tyre size 365/80 R20 and 26.5R25
      Working weight 4612 kg and 23300 kg

      Motor

      Manufacturer Case and Cummins
      Model 432T/M3 and LTA 10-C 290

      Hydraulic system

      Type of pump Open-centered with pressure/flow compensation and two axial piston pumps
      Overflow valve pressure 25000 kPa and 25000 kPa

      Gear box

      Transmission type Hydro-Static Transmission and powershift transmission with camshaft

      Images

      Sizes

      1. Length with bucket on ground level 5315 mm 1. Length with bucket on ground level 8830 mm
      3. Height to cab upper part 2690 mm 3. Height to cab upper part 3490 mm
      4. Wheelbase 2182 mm 4. Wheelbase 3700 mm
      5. Clearance 330 mm 5. Clearance 490 mm
      6. Hinge axis maximum height 3252 mm 6. Hinge axis maximum height 4450 mm
      8. Radius at maximum lifting and unloading 851 mm 8. Radius at maximum lifting and unloading 1140 mm

      Shovel

      7. Unloading ground clearance at maximum lifting 2502 mm 7. Unloading ground clearance at maximum lifting 3230 mm