vs.

      Case 621DXR vs. Dressta 534C

      6 reasons to buy Case 621DXR:

      Sizes

      Clearance 474 mm and 390 mm 18 % more or 84 mm

      Shovel

      Breakout power 23936 pound and 31472 pound 24 % less or 7536 pound
      Unloading ground clearance at maximum lifting 3232 mm and 3099.8 mm 4 % more or 132.2 mm

      Operation

      Turn radius 5175 mm and 6220 mm 17 % less or 1045 mm

      Hydraulic system

      Lifting time 5.4 sec and 6 sec 10 % less or 0.6 sec
      Unloading time 1.5 sec and 2 sec 25 % less or 0.5 sec

      19 reasons to buy Dressta 534C:

      Shovel

      Bucket capacity with top 3.4 m3 and 2.3 m3 32 % more or 1.1 m3
      Brimmed bucket capacity 3 m3 and 2 m3 33 % more or 1 m3

      Operation

      Fuel Capacity 300 l. and 189.3 l. 37 % more or 110.7 l.
      Hydraulic system fluid volume 230 l. and 113.6 l. 51 % more or 116.4 l.
      Engine oil volume 19 l. and 16.2 l. 15 % more or 2.8 l.
      Cooling system fluid volume 32 l. and 24 l. 25 % more or 8 l.
      Transmission fluid volume 95 l. and 18.9 l. 80 % more or 76.1 l.
      Static tipping weight 16970 kg and 8341.1 kg 51 % more or 8628.9 kg

      Motor

      Full power 160 kW and 108.9 kW 32 % more or 51.1 kW
      Torque measured at 1500 rev / min and 1200 rev / min 20 % more or 300 rev
      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev
      Displacement 8.3 l. and 6.7 l. 19 % more or 1.6 l.
      Maximum torque 975 Nm and 671.1 Nm 31 % more or 303.9 Nm
      Effective power 152 kW and 101.4 kW 33 % more or 50.6 kW

      Hydraulic system

      Pump bandwidth 301 l/min and 171 l/min 43 % more or 130 l/min
      Lowering time 3.5 sec and 5 sec 30 % less or 1.5 sec

      Gear box

      Reverse gears number 4 and 3 25 % more or 1
      Maximum forward speed 39 km/h and 38.6 km/h 1 % more or 0.4 km/h
      Maximum reverse gear 39 km/h and 25.1 km/h 36 % more or 13.9 km/h

      Neutral reasons:

      Sizes

      Length with bucket on ground level 7445 mm and 7924.8 mm
      Between tyres width 2382 mm and 2081.8 mm
      Height to cab upper part 3306 mm and 3657.6 mm

      Shovel

      Shovel width 2602 mm and 2795 mm

      Operation

      Generator current strength 70 amperes and 70 amperes
      Rear axle oscillating 24 degrees and 26 degrees
      Tyre size 20.5x25 L3 and 23.5x25-20PR(L3) standard
      Working weight 11958.5 kg and 20380 kg
      Operating voltage 24 V and 24 V

      Motor

      Cylinders number 6 and 6
      Aspiration Turbocharger with air cooling by oncoming air flow and 4-stroke diesel engine, turbocharging, CAC, direct run, direct injection
      Manufacturer Case and Cummins
      Model Family III 668TA/M2 and C8.3

      Hydraulic system

      Type of pump in the middle position with locking with pressure / flow compensation and One single and one double gear type, controlled by accessory drive
      Overflow valve pressure 172.4 kPa and 14996.1 kPa

      Gear box

      Transmission type 4F / 3R (4 forward / 3 reverse speeds) proportional with electronic control module, with torque measurement, automatic / manual shifting and modulating and powershift transmission with camshaft
      Forward gears number 4 and 4

      Images

      Sizes

      5. Clearance 474 mm 5. Clearance 390 mm
      1. Length with bucket on ground level 7445 mm 1. Length with bucket on ground level 7924.8 mm
      2. Between tyres width 2382 mm 2. Between tyres width 2081.8 mm
      3. Height to cab upper part 3306 mm 3. Height to cab upper part 3657.6 mm

      Shovel

      7. Unloading ground clearance at maximum lifting 3232 mm 7. Unloading ground clearance at maximum lifting 3099.8 mm