- Home/
- Comparison/
- Wheel-Mounted Loader/
- Case 621DXR vs. John Deere 344E
Case 621DXR vs. John Deere 344E
20 reasons to buy Case 621DXR:
Sizes
Radius at maximum lifting and unloading | 1017 mm and 819 mm | 19 % more or 198 mm |
Clearance | 474 mm and 390 mm | 18 % more or 84 mm |
Shovel
Unloading ground clearance at maximum lifting | 3232 mm and 2711 mm | 16 % more or 521 mm |
Bucket capacity with top | 2.3 m3 and 1.2 m3 | 48 % more or 1.1 m3 |
Operation
Engine oil volume | 16.2 l. and 13 l. | 20 % more or 3.2 l. |
Transmission fluid volume | 18.9 l. and 7.8 l. | 59 % more or 11.1 l. |
Front axle / differential fluid volume | 22 l. and 16 l. | 27 % more or 6 l. |
Rear axle / differential fluid volume | 22 l. and 16 l. | 27 % more or 6 l. |
Static tipping weight | 8341.1 kg and 5151 kg | 38 % more or 3190.1 kg |
Fuel Capacity | 189.3 l. and 121.1 l. | 36 % more or 68.2 l. |
Hydraulic system fluid volume | 113.6 l. and 40 l. | 65 % more or 73.6 l. |
Motor
Displacement | 6.7 l. and 4.5 l. | 33 % more or 2.2 l. |
Cylinders number | 6 and 4 | 33 % more or 2 |
Maximum torque | 671.1 Nm and 291.5 Nm | 57 % more or 379.6 Nm |
Effective power | 101.4 kW and 55.9 kW | 45 % more or 45.5 kW |
Full power | 108.9 kW and 59.7 kW | 45 % more or 49.2 kW |
Hydraulic system
Pump bandwidth | 171 l/min and 122.3 l/min | 28 % more or 48.7 l/min |
Gear box
Forward gears number | 4 and 2 | 50 % more or 2 |
Reverse gears number | 3 and 2 | 33 % more or 1 |
Maximum forward speed | 38.6 km/h and 29.9 km/h | 23 % more or 8.7 km/h |
9 reasons to buy John Deere 344E:
Shovel
Breakout power | 14595 pound and 23936 pound | 39 % less or 9341 pound |
Operation
Generator current strength | 105 amperes and 70 amperes | 33 % more or 35 amperes |
Cooling system fluid volume | 34 l. and 24 l. | 29 % more or 10 l. |
Turn radius | 4395.2 mm and 5175 mm | 15 % less or 779.8 mm |
Motor
Power measured at | 2200 rev / min and 2000 rev / min | 9 % more or 200 rev |
Hydraulic system
Lifting time | 5.3 sec and 5.4 sec | 2 % less or 0.1 sec |
Unloading time | 1 sec and 1.5 sec | 33 % less or 0.5 sec |
Lowering time | 3 sec and 5 sec | 40 % less or 2 sec |
Gear box
Maximum reverse gear | 29.9 km/h and 25.1 km/h | 16 % more or 4.8 km/h |
Neutral reasons:
Sizes
Wheelbase | 2900 mm and 3550 mm |
Hinge axis maximum height | 4260 mm and 3430 mm |
Length with bucket on ground level | 7445 mm and 6010 mm |
Between tyres width | 2382 mm and 2174 mm |
Height to cab upper part | 3306 mm and 3100 mm |
Shovel
Shovel width | 2602 mm and 2350 mm |
Operation
Operating voltage | 24 V and 12 V |
Rear axle oscillating | 24 degrees and 26 degrees |
Tyre size | 20.5x25 L3 and 15.5-25 |
Working weight | 11958.5 kg and 7263.8 kg |
Motor
Torque measured at | 1200 rev / min and 1200 rev / min |
Manufacturer | Case and John Deere |
Model | Family III 668TA/M2 and 4045D |
Aspiration | Turbocharger with air cooling by oncoming air flow and natural aspiration |
Hydraulic system
Type of pump | in the middle position with locking with pressure / flow compensation and gear type pump |
Overflow valve pressure | 172.4 kPa and 17238 kPa |
Gear box
Transmission type | 4F / 3R (4 forward / 3 reverse speeds) proportional with electronic control module, with torque measurement, automatic / manual shifting and modulating and Hydro-Static Transmission |
Images
Sizes
2. Between tyres width | 2382 mm | 2. Between tyres width | 2174 mm |
3. Height to cab upper part | 3306 mm | 3. Height to cab upper part | 3100 mm |
4. Wheelbase | 2900 mm | 4. Wheelbase | 3550 mm |
5. Clearance | 474 mm | 5. Clearance | 390 mm |
6. Hinge axis maximum height | 4260 mm | 6. Hinge axis maximum height | 3430 mm |
8. Radius at maximum lifting and unloading | 1017 mm | 8. Radius at maximum lifting and unloading | 819 mm |
1. Length with bucket on ground level | 7445 mm | 1. Length with bucket on ground level | 6010 mm |
Shovel
7. Unloading ground clearance at maximum lifting | 3232 mm | 7. Unloading ground clearance at maximum lifting | 2711 mm |