- Home/
- Comparison/
- Wheel-Mounted Loader/
- Case 621DXR vs. Komatsu WA50-6
Case 621DXR vs. Komatsu WA50-6
21 reasons to buy Case 621DXR:
Sizes
| Radius at maximum lifting and unloading | 1017 mm and 900 mm | 12 % more or 117 mm |
| Clearance | 474 mm and 310 mm | 35 % more or 164 mm |
Shovel
| Unloading ground clearance at maximum lifting | 3232 mm and 2475 mm | 23 % more or 757 mm |
Operation
| Generator current strength | 70 amperes and 40 amperes | 43 % more or 30 amperes |
| Fuel Capacity | 189.3 l. and 50 l. | 74 % more or 139.3 l. |
| Hydraulic system fluid volume | 113.6 l. and 42 l. | 63 % more or 71.6 l. |
| Engine oil volume | 16.2 l. and 7.5 l. | 54 % more or 8.7 l. |
| Cooling system fluid volume | 24 l. and 7 l. | 71 % more or 17 l. |
| Front axle / differential fluid volume | 22 l. and 4.8 l. | 78 % more or 17.2 l. |
| Rear axle / differential fluid volume | 22 l. and 4.5 l. | 80 % more or 17.5 l. |
| Static tipping weight | 8341.1 kg and 2580 kg | 69 % more or 5761.1 kg |
Motor
| Displacement | 6.7 l. and 2.2 l. | 67 % more or 4.5 l. |
| Effective power | 101.4 kW and 28.8 kW | 72 % more or 72.6 kW |
| Cylinders number | 6 and 4 | 33 % more or 2 |
| Full power | 108.9 kW and 29.7 kW | 73 % more or 79.2 kW |
Hydraulic system
| Pump bandwidth | 171 l/min and 46.5 l/min | 73 % more or 124.5 l/min |
| Lifting time | 5.4 sec and 5.7 sec | 5 % less or 0.3 sec |
Gear box
| Forward gears number | 4 and 1 | 75 % more or 3 |
| Reverse gears number | 3 and 1 | 67 % more or 2 |
| Maximum forward speed | 38.6 km/h and 15 km/h | 61 % more or 23.6 km/h |
| Maximum reverse gear | 25.1 km/h and 15 km/h | 40 % more or 10.1 km/h |
4 reasons to buy Komatsu WA50-6:
Operation
| Turn radius | 3825 mm and 5175 mm | 26 % less or 1350 mm |
Motor
| Power measured at | 2400 rev / min and 2000 rev / min | 17 % more or 400 rev |
Hydraulic system
| Unloading time | 1 sec and 1.5 sec | 33 % less or 0.5 sec |
| Lowering time | 3.5 sec and 5 sec | 30 % less or 1.5 sec |
Neutral reasons:
Sizes
| Length with bucket on ground level | 7445 mm and 4580 mm |
| Between tyres width | 2382 mm and 1650 mm |
| Height to cab upper part | 3306 mm and 2540 mm |
| Wheelbase | 2900 mm and 1900 mm |
| Hinge axis maximum height | 4260 mm and 3120 mm |
Shovel
| Shovel width | 2602 mm and 1690 mm |
Operation
| Operating voltage | 24 V and 12 V |
| Rear axle oscillating | 24 degrees and 14 degrees |
| Tyre size | 20.5x25 L3 and 15.5/60-18 |
| Working weight | 11958.5 kg and 3825 kg |
Motor
| Manufacturer | Case and Komatsu |
| Model | Family III 668TA/M2 and 4D88E-6B |
Hydraulic system
| Overflow valve pressure | 172.4 kPa and 20684.3 kPa |
Gear box
| Transmission type | 4F / 3R (4 forward / 3 reverse speeds) proportional with electronic control module, with torque measurement, automatic / manual shifting and modulating and Hydro-Static Transmission |
Images
Sizes
| 1. Length with bucket on ground level | 7445 mm | 1. Length with bucket on ground level | 4580 mm |
| 2. Between tyres width | 2382 mm | 2. Between tyres width | 1650 mm |
| 3. Height to cab upper part | 3306 mm | 3. Height to cab upper part | 2540 mm |
| 4. Wheelbase | 2900 mm | 4. Wheelbase | 1900 mm |
| 5. Clearance | 474 mm | 5. Clearance | 310 mm |
| 6. Hinge axis maximum height | 4260 mm | 6. Hinge axis maximum height | 3120 mm |
| 8. Radius at maximum lifting and unloading | 1017 mm | 8. Radius at maximum lifting and unloading | 900 mm |
Shovel
| 7. Unloading ground clearance at maximum lifting | 3232 mm | 7. Unloading ground clearance at maximum lifting | 2475 mm |