vs.

      Case 721DXT vs. Hitachi LX300-7A

      8 reasons to buy Case 721DXT:

      Shovel

      Breakout power 124.8 kN and 237 kN 47 % less or 112.2 kN

      Operation

      Turn radius 5770 mm and 6780 mm 15 % less or 1010 mm
      Generator current strength 70 amperes and 50 amperes 29 % more or 20 amperes

      Motor

      Power measured at 2000 rev / min and 1800 rev / min 10 % more or 200 rev

      Hydraulic system

      Lifting time 5.6 sec and 6.8 sec 18 % less or 1.2 sec
      Lowering time 3.3 sec and 3.5 sec 6 % less or 0.2 sec
      Pump bandwidth 779.8 l/min and 154 l/min 80 % more or 625.8 l/min

      Gear box

      Maximum forward speed 38 km/h and 33.5 km/h 12 % more or 4.5 km/h

      17 reasons to buy Hitachi LX300-7A:

      Sizes

      Clearance 425 mm and 365 mm 14 % more or 60 mm
      Radius at maximum lifting and unloading 1480 mm and 1279 mm 14 % more or 201 mm

      Shovel

      Unloading ground clearance at maximum lifting 3130 mm and 2930 mm 6 % more or 200 mm
      Bucket capacity with top 5 m3 and 2.3 m3 54 % more or 2.7 m3

      Operation

      Front axle / differential fluid volume 85 l. and 30.3 l. 64 % more or 54.7 l.
      Rear axle / differential fluid volume 87 l. and 27.4 l. 69 % more or 59.6 l.
      Static tipping weight 20640 kg and 12526 kg 39 % more or 8114 kg
      Fuel Capacity 450 l. and 246 l. 45 % more or 204 l.
      Hydraulic system fluid volume 260 l. and 193.1 l. 26 % more or 66.9 l.
      Engine oil volume 34 l. and 14.2 l. 58 % more or 19.8 l.
      Cooling system fluid volume 90 l. and 36.9 l. 59 % more or 53.1 l.
      Transmission fluid volume 50 l. and 25.6 l. 49 % more or 24.4 l.

      Motor

      Effective power 243 kW and 126.8 kW 48 % more or 116.2 kW
      Displacement 15.7 l. and 6.7 l. 57 % more or 9.0 l.

      Hydraulic system

      Unloading time 1.7 sec and 1.9 sec 11 % less or 0.2 sec

      Gear box

      Reverse gears number 4 and 3 25 % more or 1
      Maximum reverse gear 34.5 km/h and 25.7 km/h 26 % more or 8.8 km/h

      Neutral reasons:

      Sizes

      Between tyres width 2603 mm and 3180 mm
      Height to cab upper part 3337 mm and 3750 mm
      Wheelbase 3253 mm and 3700 mm
      Hinge axis maximum height 4157 mm and 4430 mm
      Length with bucket on ground level 7919 mm and 9430 mm

      Shovel

      Shovel width 2700 mm and 3480 mm

      Operation

      Operating voltage 24 V and 24 V
      Rear axle oscillating 24 degrees and 24 degrees
      Tyre size 20.5x25 L3 and 26.5-25-24PR (L3)
      Working weight 14321.7 kg and 29700 kg

      Motor

      Model Family III 668TA/E2 and CC-6WG1X
      Manufacturer Case and Isuzu
      Cylinders number 6 and 6
      Aspiration Turbocharger with air cooling by oncoming air flow and Turbocharging with intercooler

      Hydraulic system

      Type of pump in the middle position with locking with pressure / flow compensation and gear type pump
      Overflow valve pressure 25000 kPa and 20600 kPa

      Gear box

      Transmission type 4F / 3R (4 forward / 3 reverse speeds) proportional with electronic control module, with torque measurement, automatic / manual shifting and modulating and Torque converter, powershift of intermediate type with automatic switching, computer-controlled and manual gearbox
      Forward gears number 4 and 4

      Images

      Sizes

      2. Between tyres width 2603 mm 2. Between tyres width 3180 mm
      3. Height to cab upper part 3337 mm 3. Height to cab upper part 3750 mm
      4. Wheelbase 3253 mm 4. Wheelbase 3700 mm
      5. Clearance 365 mm 5. Clearance 425 mm
      6. Hinge axis maximum height 4157 mm 6. Hinge axis maximum height 4430 mm
      8. Radius at maximum lifting and unloading 1279 mm 8. Radius at maximum lifting and unloading 1480 mm
      1. Length with bucket on ground level 7919 mm 1. Length with bucket on ground level 9430 mm

      Shovel

      7. Unloading ground clearance at maximum lifting 2930 mm 7. Unloading ground clearance at maximum lifting 3130 mm