vs.

      Case 921C vs. JCB 426BHT

      16 reasons to buy Case 921C:

      Sizes

      Clearance 445 mm and 375 mm 16 % more or 70 mm
      Radius at maximum lifting and unloading 1100 mm and 986 mm 10 % more or 114 mm

      Shovel

      Unloading ground clearance at maximum lifting 3150 mm and 2876 mm 9 % more or 274 mm
      Bucket capacity with top 3.6 m3 and 1.8 m3 50 % more or 1.8 m3

      Operation

      Engine oil volume 36.9 l. and 14.7 l. 60 % more or 22.2 l.
      Generator current strength 70 amperes and 55 amperes 21 % more or 15 amperes
      Transmission fluid volume 28.4 l. and 23 l. 19 % more or 5.4 l.
      Front axle / differential fluid volume 63.6 l. and 26 l. 59 % more or 37.6 l.
      Rear axle / differential fluid volume 63.6 l. and 26 l. 59 % more or 37.6 l.
      Fuel Capacity 393.7 l. and 212 l. 46 % more or 181.7 l.
      Hydraulic system fluid volume 232.8 l. and 210 l. 10 % more or 22.8 l.

      Motor

      Effective power 184.9 kW and 98.4 kW 47 % more or 86.5 kW
      Full power 201.3 kW and 107.4 kW 47 % more or 93.9 kW
      Displacement 10.8 l. and 6 l. 44 % more or 4.8 l.
      Maximum torque 1255.5 Nm and 588 Nm 53 % more or 667.5 Nm

      Gear box

      Maximum forward speed 38.8 km/h and 37.9 km/h 2 % more or 0.9 km/h

      8 reasons to buy JCB 426BHT:

      Shovel

      Breakout power 27426.7 pound and 50275 pound 45 % less or 22848.3 pound

      Operation

      Cooling system fluid volume 50 l. and 47.3 l. 5 % more or 2.7 l.

      Motor

      Power measured at 2200 rev / min and 2100 rev / min 5 % more or 100 rev
      Torque measured at 1400 rev / min and 1300 rev / min 7 % more or 100 rev

      Hydraulic system

      Pump bandwidth 220 l/min and 143.8 l/min 35 % more or 76.2 l/min
      Lifting time 4.8 sec and 6.2 sec 23 % less or 1.4 sec
      Lowering time 3.4 sec and 4.9 sec 31 % less or 1.5 sec

      Gear box

      Maximum reverse gear 26.9 km/h and 26.7 km/h 1 % more or 0.2 km/h

      Neutral reasons:

      Sizes

      Height to cab upper part 3570 mm and 3155 mm
      Wheelbase 3400 mm and 2900 mm
      Hinge axis maximum height 4280 mm and 3839 mm
      Between tyres width 2940 mm and 2403 mm
      Length with bucket on ground level 8550 mm and 6540 mm

      Shovel

      Shovel width 3050 mm and 2498 mm

      Operation

      Operating voltage 24 V and 24 V
      Rear axle oscillating 24 degrees and 25 degrees
      Tyre size 26.5x25 L3 and 17.5x25x12 layers (L2)

      Motor

      Model QSMII and 1006-60T
      Manufacturer Cummins and Perkins
      Cylinders number 6 and 6
      Aspiration Turbocharger with air cooling by oncoming air flow and turbocharging

      Hydraulic system

      Type of pump pumps with twin vanes and Variable displacement piston pump, with load sensing, axial
      Overflow valve pressure 19650 kPa and 22145.9 kPa
      Unloading time 1.5 sec and 1.5 sec

      Gear box

      Transmission type 4F / 3R (4 forward / 3 reverse speeds) proportional with electronic control module, with torque measurement, automatic / manual shifting and modulating and four wheel drive, semi-automatic transmission with power gear shifting
      Forward gears number 4 and 4
      Reverse gears number 3 and 3

      Images

      Sizes

      1. Length with bucket on ground level 8550 mm 1. Length with bucket on ground level 6540 mm
      2. Between tyres width 2940 mm 2. Between tyres width 2403 mm
      3. Height to cab upper part 3570 mm 3. Height to cab upper part 3155 mm
      4. Wheelbase 3400 mm 4. Wheelbase 2900 mm
      5. Clearance 445 mm 5. Clearance 375 mm
      6. Hinge axis maximum height 4280 mm 6. Hinge axis maximum height 3839 mm
      8. Radius at maximum lifting and unloading 1100 mm 8. Radius at maximum lifting and unloading 986 mm

      Shovel

      7. Unloading ground clearance at maximum lifting 3150 mm 7. Unloading ground clearance at maximum lifting 2876 mm